Xerox 750DP 5750 Administrator Guide - Page 80
In the New Object dialog box, select Print Server.
![]() |
UPC - 042215455107
View all Xerox 750DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
33-8 Setting up Network Servers TO CREATE AN NDS PRINT SERVER AND ASSIGN A PRINTER: 1. Start NetWare Administrator and select the container in which you are going to define the NDS print server for the DocuColor. 2. Choose Create from the Object menu. 3. In the New Object dialog box, select Print Server. 4. Enter a name for the print server. 5. Select Define Additional Properties. 6. Click Create. 7. In the Print Server dialog box, click Assignments. 8. Select Add and select the printer (object) you want to assign to the print server. 9. In the Select Object dialog box, browse the Directory Context list until the printer you want is listed under Objects. 10. Select the printer and click OK. The remaining setup is performed on the DocuColor. An outline follows; for more detailed information, see page 2-9. COMPLETING THE SETUP ON THE DOCUCOLOR: 1. With the DocuColor connected to the Novell network, restart the DocuColor to perform Setup. For access to Setup, see page 2-3. 2. In the Network Setup, choose Port Setup and enable the port you will use for printing to the DocuColor. This can be Ethernet, Token Ring (if you have installed the Token Ring option), or both. 3. Choose Protocol Setup and configure the protocols you will use. Choose IPX/SPX Setup to select the frame type(s) that will be used between the NetWare server(s) and the DocuColor.
![](/manual_guide/products/xerox-750dp-5750-administrator-guide-82b86bd/80.png)