Xerox M123 Quick Reference Guide - Page 38
Copy, Copying Procedure, 1. Load the Documents
View all Xerox M123 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 Copy This chapter contains information on the copy screens and the features available. NOTE: Some of the features described in this chapter are optional and may not apply to your machine configuration. Copying Procedure This section describes the basic copy procedure. Before making copies on the machine, confirm what is to be copied and the number of copies required. Follow the steps below. 1. Load the Documents - page 37 2. Select the Features - page 39 3. Enter the Quantity - page 40 4. Start the Copy Job - page 40 5. Confirm the Copy Job in the Job Status - page 40 Stop the Copy Job - page 41 NOTE: If the Authentication feature is enabled, you may need an account number before using the machine. To get an account number or for further information, contact the Key Operator. 1. Load the Documents Document input areas are as follows. • Document feeder for single or multiple documents • Document glass for single documents or bound originals NOTE: The document glass cover will be fitted in the non-document feeder configuration. NOTE: The machine automatically detects standard document sizes. The sizes that can be detected vary depending on the paper size table specified by the Key Operator. For more information on setting the paper size table, refer to Paper Size Settings in the Setups chapter on User Guide. If the document is of a non-standard size or not identified as a standard size, the machine will prompt you to check the document or manually enter the document size. For information on how to enter a document size manually, refer to Original Size on page 52. Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide 37