Xerox M123 Quick Reference Guide - Page 49
Image Quality - Copy, Original Type
View all Xerox M123 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3 Copy • Uncollated - Delivers the copies in stacks based on the number of copies required for each document. For example, two copies of a three-page document are delivered in the order 1-1, 2-2, 3-3. Output Destination Select an output tray for the copy job from [Center Output Tray] and [Finisher Tray]. NOTE: Before using the Center Output Tray, it must be enabled through the Extended Tray Module setting. Select the type of the Extended Tray Module used. If the optional finisher is installed, select [Offset Stacking Module] to enable the Center Output Tray. Image Quality - Copy This section describes the features used to adjust the quality of the output image using the Image Quality options. For more information on the features available, refer to the following. Original Type - page 48 Lighten/Darken - page 49 Sharpness - page 49 Auto Exposure - page 50 1. Press the button on the control panel. 2. Select [Copy] on the touch screen. 3. Select the [Image Quality] tab. 4. Select the required option. Original Type This feature allows you to copy at optimum image quality by selecting the type of the original documents. 48 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide