Yamaha CP300 Owner's Manual - Page 44
Re-recording Parts of a Song, PresetSong, Bar 012, P-000:NewSong, RecMode, ExtraTrackCh=3, Start:Norm
UPC - 086792839790
View all Yamaha CP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Basic Operation Recording Your Performance Re-recording Parts of a Song This section explains how to record a specific section or part of a Song again. 1 Use the B [- (NO)][+ (YES)] buttons while the playback display is displayed to move through the measures, or play back the recording and press the [PLAY/PAUSE] button to locate a point slightly prior to the beginning of the part you wish to rerecord. If the playback display does not appear, press one of the SONG SELECT [N][O] buttons once. Indicates the current measure. (The words "bar" and "measure" are used interchangeably.) A B PresetSong P-000:NewSong Bar 012 NO YES C D 2 Select a Voice or Voices for recording, if necessary. Repeat Step 2 on page 42 if you wish to change the previous settings. 3 Press and hold down the [REC] button, and press one of the C [-][+] buttons repeatedly to specify how the recording should start. Similarly, use the D [-][+] buttons to specify how the recording should end. While you are holding down the [REC] button, the following recording method select display appears. A B RecMode ExtraTrackCh=3 NO YES Start:Norm End:Replace C D Starting methods: Norm: All existing data in the Song will be erased after re-recording starts. Key On: Data that exists prior to the point where you start playing a note will not be erased (when rerecording part of the Song). Ending methods: Replace: Existing data following the point at which you stopped recording will be erased. Punch Out: Existing data following the point at which you stopped recording will remain. 4 Select a recording track, then start recording. After this, follow the procedure beginning with Step 3 on page 42. 44 CP300 Owner's Manual