Yamaha CP300 Owner's Manual - Page 55

Master Settings-Master Edit Octave Setting for Connected External Tone Generator The pitch of a note can be shifted upward or downward in steps of an octave in each zone. You can adjust the offset up or down over a maximum range of two octaves. A Octave Zone 1 C B NO YES 0 D Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Setting range: -2 - 0 - +2 -2 (two octaves lower), 0 (no pitch shift), +2 (two octaves higher) Default setting: 0 The Octave setting is effective when the [MASTER] button is on. It also affects the following settings: Internal: [VOICE EDIT] Octave setting for each Voice MIDI Output: [MASTER EDIT] Octave setting for each zone When the [MASTER] button is off, Octave affects the following: Internal and MIDI Output: [VOICE EDIT] Octave setting for each Voice MIDI Transmission Channel for Master Mode Specifies the channels over which the CP300 transmits MIDI data from each zone. A MidiOutChannel Zone 1 C Ch1 B NO YES D Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Setting range: Ch 1 - Ch 16, Off Default settings: Zone 1 Zone 2 Zone 3 Zone 4 Ch 1 Ch 2 Ch 3 Ch 4 n When the [MASTER] button is turned off, the "MIDI Out Channel" setting in the MIDI Settings menu is used for MIDI channel assignments. Internal Tone Generator On/Off Status Turns the sound from the internal tone generator on or off for each part. A InternalTG Zone 1 On C Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Settings: On/Off Default setting: On B NO YES D Reference CP300 Owner's Manual 55