Yamaha CP300 Owner's Manual - Page 72

Reference Master Equalizer Settings This section explains how to set the Master Equalizer using the Master EQ Edit menu. n This setting is retained even after you turn off the power to the CP300. If you set the Memory Backup's Equalizer setting to Off in the Other Settings menu, the Master Equalizer settings will return to the default (initial) values when you turn on the power the next time (page 71). Specifies the type MASTER PERFORMANCE TRANSPOSE TRACK 1 2 3-16 SONG FILE MIDI OUT PANEL LOCK A MASTER EDIT PERFORM.FILE SONG SELECT REC STOP PLAY/PAUSE SONG SETTING DOWN UP NEW SONG SYNCHRO START SONG TEMPO C B NO YES D CONTRAST EXIT GRAND PIANO 1 GRAND PIANO 2 MONO PIANO E. PIANO 1 E. PIANO 2 E. PIANO 3 CLAVI. VIBES VOICE EDIT SPLIT 1 2 3 4 5 6 7 8 ORGAN 1 ORGAN 2 HARPSI. STRINGS CHOIR/PAD GUITAR BASS XG VARIATION 9 10 11 12 13 14 15 16 VOICE/PERFORMANCE REVERB CHORUS SPEAKER MIDI SETTING MASTER EQ EDIT CLICK OTHER SETTING DEMO Specifies the item Specifies the value MASTER EQ EDIT [▼][▲] buttons 1 Use the MASTER EQ EDIT [▼][▲] buttons to show the Master EQ Edit display. A Equalizer LowGain C Parameter name Master Equalizer type Edit 0dB B NO YES D Parameter value 2 Set the Master Equalizer type by using the MASTER EQ EDIT [▼][▲] buttons or the B [- (NO)][+ (YES)] buttons. Setting range: Mellow 1 - 3, Normal, Bright 1 - 3, Edit Default setting: Edit 3 Use the C [-][+] buttons to select the parameter item. 4 Use the D [-][+] buttons to change the value. The contents of the EQ parameters are briefly explained below. Parameter name Low Gain Low Freq. Low Q LowMid Gain LowMid Freq. LowMid Q Mid Gain Mid Freq. Mid Q HighMid Gain HighMid Freq. HighMid Q High Gain High Freq. High Q Contents EQ low-range gain*1 EQ low-range frequency EQ low-range resonance EQ low-middle range gain*1 EQ low-middle frequency EQ low-middle resonance EQ middle range gain*1 EQ middle frequency EQ middle resonance EQ high-middle range gain*1 EQ high-middle frequency EQ high-middle resonance EQ high range gain*1 EQ high frequency EQ high resonance Data Range -9 dB - +9 dB*2 32 Hz - 2.0 kHz 0.1 - 12.0 -9 dB - +9 dB*2 100 Hz - 10.0 kHz 0.1 - 12.0 -9 dB - +9 dB*2 100 Hz - 10.0 kHz 0.1 - 12.0 -9 dB - +9 dB*2 100 Hz - 10.0 kHz 0.1 - 12.0 -9 dB - +9 dB*2 500 Hz - 16.0 kHz 0.1 - 12.0 *1 You can also set the EQ Gain by moving the [MASTER EQUALIZER] slider. Keep in mind that the most recently made settings will be effective. *2 You can specify the range of the gain from -12 dB to +12 dB on MIDI Input. The display will also indicate from -12 dB to +12 dB. n If the "Equalizer Lock" parameter (page 71) in the Other Settings menu is turned on, the Master Equalizer settings will not be affected by selecting a Performance, or by Song playback and incoming MIDI data. 72 CP300 Owner's Manual