Yamaha CP300 Owner's Manual - Page 89

Reference Connecting to a Computer and Other MIDI Devices Connecting to a Mixer These are extra audio outputs in addition to the main OUTPUT L/R jacks. The CP300 also features professional-use balanced XLR connectors for the OUTPUT L/R jacks. This type of connector is used in professional studio equipment and installations. OUTPUT L jack OUTPUT R jack Mixer OUTPUT L OUTPUT R Amplifier Headphones PHONES jack CP300 Powered speaker (Left) Powered speaker (Right) n • Connecting a pair of headphones does not affect audio output from the OUTPUT L/R and OUTPUT L/ MONO, R jacks. You can adjust the volume of the external audio equipment, built-in speakers or headphones with the [MASTER VOLUME] dial. • The sound monitored through the headphones is identical to the sound of the OUTPUT L/R and OUTPUT L/ MONO, R jacks. About the OUTPUT L/R jacks These XLR connectors carry a balanced signal output, and are intended for use in professional studios and installations. If the corresponding circuitry is designed properly, however, XLR-type connectors will also handle unbalanced signals with no problem. Microphone cables usually have this type of connector, as do the inputs and outputs of most professional audio gear. Connecting to External Equipment The CP300 also features a set of INPUT jacks. The stereo outputs from another instrument can be connected to these jacks, allowing you to play the sound of an external instrument through the CP300's speakers. Connect the outputs from the other instrument to the INPUT L/MONO and R jacks on the rear panel. INPUT L/MONO jack INPUT R jack OUTPUT L/MONO jack OUTPUT R jack MUSIC PRODUCTION SYNTHESIZER CP300 External MIDI synthesizer/tone generator The sound of an instrument connected to these INPUT jacks cannot be adjusted from the CP300. Any level adjustments must be done from the instrument itself. CP300 Owner's Manual 89