Yamaha CVP-701 CVP-701 Owners Manual - Page 113
Assembly
View all Yamaha CVP-701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Assembly Preparation Before Assembling CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten all screws upon completing assembly of each unit. • To disassemble the unit, reverse the assembly sequence given below. Have a Phillips-head (+) screwdriver of the appropriate size ready. Remove foamed styrol pads from the package, position them on the floor, then place A on top of them. Position the pads so that they will not hide the connectors on the bottom of A. Remove all parts from the package and make sure you have all of the items. Assembly parts F 6 x 20 mm x 4 G 4 x 12 mm x 2 H 4 x 20 mm x 4 J 6 x 16 mm x 6 Headphone hanger K 4 x 10 mm x 2 Headphone hanger Cord holders x 2 Power cord Holder set For details on how to set the holders, refer to page 109. Assembly Main Unit A Back panel Foamed styrol pads B 1 Attach C to D and E. Untie and straighten out the bundled pedal cord. Do not discard the vinyl tie. You will need it later in step 5. Secure D and E to C using four screws F. F D Pedal Box C Bundled pedal cord inside. C E Side panel Side panel D E CVP-701 Owner's Manual 113