Yamaha CVP-701 CVP-701 Owners Manual - Page 118
USB Audio Player/Recorder, Microphone, Mixin, Console, Pedal/AUX Pedal, AUX IN jack, Style or Son
View all Yamaha CVP-701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Song When playing back a Song, some channels do not play. The Guide lamps do not light during Song playback, even after pressing the [GUIDE] button. The Guide lamps light an octave or two lower/higher than the actual pitch. The tempo, beat, measure and music notation are not displayed correctly. Playback of these channels may be set to "OFF." Turn playback ON for those channels that are set to "OFF" (page 75). Any notes outside of the 88-key range cannot be indicated by the Guide lamps. The Guide lamps sometimes light an octave or two lower/higher than the actual pitch depending on the selected Voice. Some Song data for the instrument has been recorded with special "free tempo" settings. For such Song data, the tempo, beat, measure and music notation will not be displayed correctly. USB Audio Player/Recorder When recording an audio file, an error message appears and the recording is aborted. Audio files cannot be selected. Recorded file is played back at a different volume compared to when it was recorded. Make sure to use a compatible USB flash drive (page 106). Make sure that the USB flash drive has enough memory (page 107). If you are using a USB flash drive to which data has already been recorded, check first that no important data remains on the device, then format it (page 107) and try recording again. The file format may not be compatible with the instrument. The only compatible format is WAV. Also, DRM protected files cannot be played back. The audio playback volume has been changed. Setting the volume value to 100 plays back the file at the same volume as when it was recorded (page 86). Microphone The microphone input signal cannot be recorded. The microphone input signal cannot be recorded by MIDI recording. Record by Audio recording (page 88). Mixing Console The sound seems strange or different than expected when changing a rhythm Voice (drum kit, etc.) of the Style or Song from the Mixer. When changing the rhythm/percussion Voices (drum kits, etc.) of the Style and Song from the VOICE parameter, the detailed settings related to the drum voice are reset, and in some cases you may be unable to restore the original sound. In such cases, you can restore the original sound by selecting the same Style or Song again. Pedal/AUX Pedal The damper, sostenuto and soft functions do not work for the relevant pedals. The pedal cord plug is not connected. Securely insert the pedal cord plug into the proper jack (page 114). Make sure that each pedal is properly assigned to SUSTAIN, SOSTENUTO, and SOFT (page 23). The on/off setting of the footswitch connected to the AUX PEDAL jack is reversed. Turn the instrument's power off, then turn it on again without pressing the footswitch. The damper pedal has little effect. The damper pedal was pressed when the power was turned on. This is not a malfunction; release the pedal and press it again to reset the function. AUX IN jack Sound input to the AUX IN jack is interrupted. The output volume of the external device connected to this instrument is too low. Increase the output volume of the external device. The volume level reproduced via this instrument's speakers can be adjusted by using the [MASTER VOLUME] control. 118 CVP-701 Owner's Manual