Yamaha CVP-701 CVP-701 Owners Manual - Page 114
Attach B., Mount A., Secure A., Connect the pedal cord and power cord., Attach A using six screws J.
View all Yamaha CVP-701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
2 Attach B. Align the holes on the upper side of B with the bracket holes on D and E, then attach the upper corners of B to D and E by finger-tightening two screws G. Secure the bottom end of B using four screws H. Securely tighten the screws G on the top of B that were attached in Step 2- . E G D A A E B D H 3 Mount A. CAUTION • Be extra careful not to drop or let your fingers be pinched by the main unit. • Do not hold the main unit in any position other than the position specified above. Be sure to place your hands at least 15 cm from either end of the main unit when positioning it. Align the screw holes. J 5 Connect the pedal cord and power cord. Insert the pedal cord plug into the pedal connector. Attach the cord holders to the rear panel as shown, then clip the cord into the holders. Use a vinyl tie to take up any slack in the pedal cord. Plug the power cord into the power connector. Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. PEDAL A 15 cm or further in 4 Secure A. Adjust the position of A so that the left and right ends of A will project beyond D and E equally as shown in the illustration. Attach A using six screws J. 114 CVP-701 Owner's Manual