Yamaha DGX-640 Owner's Manual - Page 13
Power Requirements, Connecting Headphones (PHONES/OUTPUT Jack), Connecting a Footswitch (SUSTAIN Jack) - keyboard
View all Yamaha DGX-640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setting Up Setting Up Be sure to do the following operations BEFORE turning on the power. Power Requirements 1 Make sure that the [ ](Standby/On) switch of the instrument is in the "Standby" position. WARNING • Use the specified adaptor (page 112). The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. 2 Connect the AC adaptor to the power supply jack. 3 Plug the AC adaptor into an AC outlet. CAUTION • Unplug the AC Power Adaptor when not using the instrument, or during electrical storms. 2 AC power adaptor 3 AC outlet Make all necessary connections below BEFORE turning the power on. Connecting Headphones (PHONES/OUTPUT Jack) mixer, tape recorder, or other line-level audio device to send the instrument's output signal to that device. WARNING • Avoid listening with the headphones at high volume for long periods of time; doing so may not only result in ear fatigue, it may be damaging to your hearing. Any pair of stereo headphones with a 1/4" stereo phone plug can be plugged in here for convenient monitoring. The speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, CAUTION • To prevent damage to the speakers, set the volume of the external devices at the minimum setting before connecting them. Failure to observe these cautions may result in electric shock or equipment damage. Also, be sure to set the volumes of all devices at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Connecting a Footswitch (SUSTAIN Jack) The sustain function lets you produce a natural sustain as you play by pressing a footswitch. Plug the supplied footswitch into this jack and use it to switch sustain on and off. NOTE • The sustain function does not affect split voices. • Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power. • Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Owner's Manual 13