Yamaha DVX-S150 Owner's Manual - Page 23

INSTALLING BATTERIES IN THE REMOTE CONTROL Installing Batteries in the Remote Control Press % 1 Press the mark on the battery cover and slide off the cover. 2 Insert the two supplied batteries (AA, R06, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+ and -). 3 Close the battery cover. ■ To replace the batteries If the batteries grow old, the effective operation distance of the remote control decreases considerably. If this happens, replace the batteries with two new ones as soon as possible. Notes • Do not use an old battery together with new one. • Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics even if they are similar in shape. • If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak. • Dispose of the batteries according to the regional regulations. • If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or clothing. Before inserting new batteries, wipe the compartment clean. • Replace the batteries within two minutes to preserve the memory in the remote control. Using the Remote Control Within 6 m (20 feet) 30˚ 30˚ Use the remote control within 6 m (20 feet) of the CinemaStation and point it toward the remote control sensor (page 4). Notes • Be careful not to spill liquid on the remote control. • Be careful not to drop the remote control. • Do not leave the remote control in the following places: - hot or humid places, such as near a heater or in a bathroom - extremely cold places - dusty places 18