Yamaha Dante-MY16-AUD Dante-MY16-AUD and R Series HA Remote Control Guide - Page 13
EXTERNAL HA Settings, Using an External Word Clock Generator, COMM PORT, EXTERNAL HA PORT
View all Yamaha Dante-MY16-AUD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Yamaha Commercial Audio Dante-MY16-AUD HA Remote Control Guide Using an External Word Clock Generator In the Word Clock menu of the mixer, select "Word Clock In" as the clock source. Open Dante Controller software and select the Clock Status tab. Set "Slave to External Clock" for just one of the Dante-MY16-AUD cards that are installed in the mixer. For the same card, check the "Preferred Master" option, and this card will transmit the word clock to the rest of the network. EXTERNAL HA Settings Next, on your digital mixer, open the EXTERNAL HA screen (or the REMOTE screen). At this screen, you can see the connected external HA equipment (the R series in this description) virtually mounted onto the rack as AD8HR. M7CL-48: RACK -> EXTERNAL HA screen LS9-32: RACK -> EXTERNAL HA screen COMM PORT Select a port that transmits/receives an HA control signal. For the LS9 or the M7CL-48ES, choose SLOT 1. The other equipment (such as the M7CL-48/32 and the PM5D) has no setting (only the HA REMOTE terminal is available). EXTERNAL HA PORT Select an audio input port (for eight channels of a slot) for each virtual rack. Make sure to match the rack number with the virtual ID on the HA device. When configuring the above settings, you can open a rack from the EXTERNAL HA screen to control the HA. Moreover, when patching a corresponding slot input to an input channel, you can adjust the external HA from the input channel controls. 13 www.yamahaproaudio.com