Yamaha Dante-MY16-AUD Dante-MY16-AUD and R Series HA Remote Control Guide - Page 5

Yamaha Commercial Audio Dante-MY16-AUD HA Remote Control Guide When the HA is controlled from the CL series, gain of the signal passing through the network can be kept constant by the Gain Compensation function. That is, in the example below, even if the HA gain is changed from the CL series, the level of the audio signal to be input to the PM5D will not fluctuate. When the HA is controlled from other consoles, the R series is operated in AD8HR mode; therefore, the Gain Compensation function cannot be used. Native mode AD8HR mode Gain Compensation CL Other Consoles CL Other Consoles Note: To control nine or more units of R series from one CL series console, you can also control the R series (in AD8HR mode) via a Dante-MY16-AUD inserted in slot 1. Examples of the system mixed with AD8HR The HA can be controlled even in the system mixed with such HA equipment as the R series, the AD8HR, and the DME24N. However, when you control these HAs, please ensure that their IDs are unique to each other. The ID of an AD8HR is automatically assigned in the order of daisy chain connection, and the ID of a DME24N is set with the DME Designer software. As for the R series, its virtual AD8HR ID is set from the front panel rotary switch (cf. page 8). Rio1608-D Unit ID: 2 = Virtual ID 3, 4 Auto = ID 1, 2 AD8HR 5 www.yamahaproaudio.com