Yamaha Dante-MY16-AUD Dante-MY16-AUD and R Series HA Remote Control Guide - Page 4

Yamaha Commercial Audio Dante-MY16-AUD HA Remote Control Guide Multiple console system example You can also connect multiple consoles onto the Dante network to share an I/O rack. In this case, although an audio signal can be distributed to multiple consoles from the same I/O rack by patching with the Dante Controller, the HA can only be controlled from one of the consoles. In the following example, the HA is controlled from the PM5D only, and the CL5 only shares an audio signal. Please see below for details about the system with multiple consoles. mode 3 Rio3224-D Primary Secondary Rio3224-D PM5D/PM5D-RH CL5 When you connect multiple consoles onto the Dante network to share an I/O rack, an audio signal can be distributed to multiple consoles from the same I/O rack, but the HA of the same I/O rack cannot be controlled from multiple consoles. CL Other Consoles Other Consoles Other Consoles It is only when the R series (in NATIVE mode) is controlled from the CL series that the same I/O rack can be controlled from multiple consoles (in this case, also the Gain Compensation function can be used). However, even on the same network, the HA of a different I/O rack can be controlled from other consoles. Native mode Native mode AD8HR mode Gain Compensation Gain Compensation CL 4 CL CL Other Consoles www.yamahaproaudio.com