Yamaha Dante-MY16-AUD Dante-MY16-AUD and R Series HA Remote Control Guide - Page 6

Yamaha Commercial Audio Equipment List Dante-MY16-AUD HA Remote Control Guide 1. Yamaha digital mixer (PM5D/PM5D-RH, M7CL-32/48, M7CL-48ES, LS9, DM2000, DM1000) or digital mixing engine (DME64N/24N) 2. Dante-MY16-AUD card (firmware v3.3.9 or later) 3. Dante-compatible Yamaha HA equipment (Rio3224-D, Rio1608-D, Ri8- D, etc.) 4. PC or Mac where Dante Controller v3.2.9 or later is installed 5. Gigabit network switch, network cable of CAT5e or better 6. D-sub 9-pin straight serial cable (male-female)* *Precautions for a serial cable: ・ This is not required when you control the HA via the Dante network from the M7CL-48ES, the LS9, or the CL series. To control the HA from another digital mixer, a serial cable is required. Moreover, it is required when you control such HA equipment as the AD8HR from the REMOTE terminal of the Dante-MY16-AUD card. ・ The serial cable to use is a D-sub 9-pin straight cable, of male-female type. As an alternative, you can use a straight cable of female-female type with a gender changer (conversion adapter) of male-male type. Female Female Straight or Straight Male Female Male - Male Straight 6 www.yamahaproaudio.com