Yamaha HTR-6150BL Owner's Manual - Page 86

Advanced setup Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Notes • Only AMAIN ZONE ON/OFF, OPROGRAM l / h, and PSTRAIGHT are effective while you are using the advanced setup menu. • No other operations can be made while you are using the advanced setup menu. • The advanced setup menu is only available in the front panel display. 1 Press CSYSTEM OFF to set this unit to the standby mode. 2 Press and hold NTONE CONTROL and then press AMAIN ZONE ON/OFF to turn on this unit. This unit turns on, and the advanced setup menu appears in the front panel display. 3 Press OPROGRAM l / h to select the parameter you want to adjust. The name of the selected parameter appears in the front panel display. 4 Press PSTRAIGHT repeatedly to change the selected parameter setting. 5 Press AMAIN ZONE ON/OFF to confirm your selection and set this unit to the standby mode. y The settings you made are reflected next time you turn on this unit. ■ Speaker impedance SP IMP. (U.S.A. and Canada models only) Use this feature to set the speaker impedance of this unit so that it matches that of your speakers. Choices: 8Ω MIN, 6Ω MIN • Select "8Ω MIN" to set the speaker impedance to 8 Ω . • Select "6Ω MIN" to set the speaker impedance to 6 Ω . SP IMP. Speaker Impedance level 8Ω MIN Front (A or B) Center Surround The impedance of each speaker must be 8 Ω or higher. 6Ω MIN Front (A or B) Center Surround The impedance of each speaker must be 6 Ω or higher. ■ SIRIUS Satellite Radio Parental Lock code number reset SR PIN Use this feature to set the code number for the SIRIUS Satellite Radio Parental Lock feature to the initial factory setting. Choices: RESET, CANCEL • Select "RESET" to set the code number to the initial factory setting. • Select "CANCEL" to set the code number to the initial factory setting. Note Even if you set "SR PIN" to "RESET", this unit does not unlock the locked channels. The initial factory setting of the Parental Lock code number is "0000". ■ Bi-amplifier setting BI-AMP Use this feature to activate or deactivate the bi-amplifier function (see page 12). Choices: ON, OFF • Select "ON" if you want to activate the bi-amplifier function. "SUR.B L/R SP" is set to "NONE" automatically, and this unit outputs the front channel audio signals at the SURROUND BACK/BI-AMP speaker terminals. • Select "OFF" if you want to deactivate the bi-amplifier function. 82 En