Yamaha M3000-24 Owner's Manual - Page 13

Variable/fixed select section The M3000's GA (Group/Aux) diversity function allows MIX buses 1-8 to function either as group buses or as AUX buses. In this section, you can switch each pair of MIX buses (1/2, 3/4, 5/6, 7/8) between functioning as group buses or as AUX buses. -15 +15 EQ -15 +15 EQ -15 +15 EQ -15 +15 EQ VARIABLE FIX 0 10 M1 0 10 M1 0 10 M1 0 10 M1 0 10 M2 0 10 M2 0 10 M2 0 10 M2 0 10 M3 0 10 M3 0 10 M3 0 10 M3 0 10 M4 PRE 0 10 M4 PRE 0 10 M4 PRE 0 10 M4 PRE 0 10 M5 0 10 M5 0 10 M5 0 10 M5 0 10 M6 0 10 M6 0 10 M6 0 10 M6 0 10 M7 0 10 M7 0 10 M7 0 10 M7 0 10 M8 PRE 0 10 M8 PRE 0 10 M8 PRE 0 10 M8 PRE 1 Control panel A Variable/fixed select switches These switches select whether the level of the signals sent from the input channels to MIX buses 1-8 will be fixed (FIX) or variable (VARIABLE). From top to bottom, these switch MIX buses 1/2, 3/4, 5/6 and 7/8. qWhen FIX ( ) is selected The corresponding pair of MIX buses (1/2, 3/4, 5/6, 7/ 8) will function as a group bus, and the signal of the MIX (FIX) bus will be output to the corresponding mix channel. In this case, the settings of the mix level controls M1-M8 (mono input channels J, stereo input channels 7) will have no effect. qWhen VARIABLE ( ) is selected The corresponding pair of MIX buses (1/2, 3/4, 5/6, 7/ 8) will function as an AUX bus, and the signal of the MIX (VARIABLE) bus will be output to the corresponding mix channel. In this case, the mix level controls M1-M8 (mono input channels J, stereo input channels 7) will take effect just as they are set. MIX MIX (VARIABLE) (FIX) 1 3 5 7 9 11 13 15 1 2 3 4 5 6 7 8 2 4 6 8 10 12 14 16 MIX INSERT I/O CHECK ON from
Ctrl Master CONTROL VARIABLE FIX ON/EDIT ST LR to Meter from INPUT MIX OUT 1 TO MATRIX PAN TO STEREO AFL MIX 2: Same as MIX 1 TO MATRIX (MIX) (SUB)(ST) 1 3 5 7 9 11 13 15 L R L R 2 4 6 8 10 12 14 16 MAS MAS AFL PFLAFL L R L R ON MIX 3-4, 5-6, 7-8: Same as MIX 1-2 13