Yamaha M3000-24 Owner's Manual - Page 22
Meter select Scene memory AM1-M8 BM9-M16 CMATRIX
View all Yamaha M3000-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Control panel Meter select section In this section you can select the source whose level will be shown in the meter bridge section. Only one of the sources 1-3 can be selected. A B C M1-M8 M9-M16 MATRIX METER SEL A M1-M8 switch When this switch is turned on, the M1/M9/ MATRIX1-M8/M16/MATRIX8 meters (page 25) will show the output levels of MIX OUT 1-8. At this time, the indicator located at the left of the switch will light. B M9-M16 switch When this switch is turned on, the M1/M9/ MATRIX1-M8/M16/MATRIX8 meters (page 25) will show the output levels of MIX OUT 9-16. At this time, the indicator located at the left of the switch will light. C MATRIX switch When this switch is turned on, the M1/M9/ MATRIX1-M8/M16/MATRIX8 meters (page 25) will show the output levels of MATRIX OUT 1-8. At this time, the indicator located at the left of the switch will light. Scene memory section On the M3000, on/off settings for the mono/stereo input channels, the output channels of the mix sections, and STEREO A OUT can be stored as a "scene" (memory numbers 1-128 can be rewritten, and 129- 130 are read-only). In this section you can save and read scene memories. (For details on using scene memories, refer to page 31.) A UTILITY B RECALL C MEMORY D STORE E CHECK 6 1 2 3 4 5 6 7 8 9 0 ENTER G SCENE MEMORY 8 1 2 3 4 5 6 7 8 DIRECT RECALL 22