Yamaha M3000-24 Owner's Manual - Page 9

select switches, Channel fader, pre-fader listen switch, VCA GROUP

Get Yamaha M3000-24 PDF manuals and user guides View all Yamaha M3000-24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

U VCA GROUP select switches These switches select the VCA master fader(s) which will control the signal output level of this channel. When you select a VCA group 1-8, the indicator located at the left of each switch will light, and the corresponding VCA master fader (VCA master section 3) will control the channel. It is possible to select two or more VCA groups for one input channel, or to control two or more input channels by the same VCA group. qChannels for which a VCA group is selected The signal output level of the channel can be controlled both by the corresponding VCA master fader(s) and by the channel fader (V). The settings of all corresponding VCA master faders are summed with the setting of the channel fader to specify the signal output level of that channel. qChannels for which a VCA group is not selected The signal output level of the channel can be controlled only by the channel fader (V). Note: For details on VCA functions, refer to page 38. Control panel V Channel fader This fader adjusts the signal output level of the input channel. This fader will affect the level of the signal that is sent to the ST bus and to the MIX buses (if the PRE switch is off). If one or more VCA groups are selected by the VCA GROUP select switches (U), the signal output level of that channel will also be affected by the corresponding VCA master fader(s). W PFL (pre-fader listen) switch When this switch is on ( ), the pre-fader/post-EQ signal of this input channel will be sent to the PFL bus, allowing it to be monitored from the MONITOR OUT jacks or the PHONES jack. Input 1-24/1-40 +48V PHANTOM MASTER PAD HA 26dB GAIN +48V HPF HPF INSERT I/O 4 Stage EQ PEAK NOM SIGNAL VCA EQ f LO g f LO-MID g Q f HI-MID g Q f HI g 1 2 from VCA Master 7 8 CHECK ON from Ctrl Master CONTROL ON/EDIT Internal Jumper DIRECT OUT MIX MIX (VARIABLE) (FIX) PFL ST 1 3 5 7 9 11 13 15 1 2 3 4 5 6 7 8 L R ON L R 2 4 6 8 10 12 14 16 ST PAN PRE M1 M2 M3 M4 PRE M5 M6 M7 M8 PRE PRE PFL M9 M10 M11 M12 M13/ M14 PAN M15/ PAN M16 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Control panel
9
U
VCA GROUP
select switches
These switches select the VCA master fader(s) which
will control the signal output level of this channel.
When you select a VCA group 1–8, the indicator
located at the left of each switch will light, and the
corresponding VCA master fader (VCA master section
3
) will control the channel. It is possible to select two
or more VCA groups for one input channel, or to con-
trol two or more input channels by the same VCA
group.
●
Channels for which a VCA group is selected
The signal output level of the channel can be con-
trolled both by the corresponding VCA master
fader(s) and by the channel fader (
V
). The settings of
all corresponding VCA master faders are summed
with the setting of the channel fader to specify the sig-
nal output level of that channel.
●
Channels for which a VCA group is not selected
The signal output level of the channel can be con-
trolled only by the channel fader (
V
).
V
Channel fader
This fader adjusts the signal output level of the input
channel. This fader will affect the level of the signal
that is sent to the ST bus and to the MIX buses (if the
PRE switch is off). If one or more VCA groups are
selected by the VCA GROUP select switches (
U
), the
signal output level of that channel will also be affected
by the corresponding VCA master fader(s).
W
PFL
(pre-fader listen) switch
When this switch is on (
), the pre-fader/post-EQ
signal of this input channel will be sent to the PFL
bus, allowing it to be monitored from the MONITOR
OUT jacks or the PHONES jack.
Note:
For details on VCA functions, refer to
page 38.
from Ctrl Master
from VCA Master
ON/EDIT
CHECK
ON
CONTROL
ST
L R
PFL
L R ON
MIX
(FIX)
MIX
(VARIABLE)
M8
M7
M6
M5
PRE
M4
M3
M2
8
7
2
1
PFL
DIRECT OUT
Internal Jumper
PRE
M15/
M16
M13/
M14
PAN
PAN
M12
M11
M10
M9
PRE
PRE
M1
PEAK
NOM
SIGNAL
ST
VCA
INSERT I/O
4 Stage EQ
EQ
HPF
HPF
PHANTOM
MASTER
+48V
Input
1-24/1-40
+48V
26dB
PAD
PAN
HA
GAIN
1 2 3 4 5 6 7 8
1
3
5
7
9
2
4
6
8
11 13 15
10 12 14 16
f
g
f
g
f
g
Q
f
g
Q
LO
LO-MID
HI-MID
HI