Yamaha M3000-24 Owner's Manual - Page 19
Monitor Input, Master, Master Pfl
View all Yamaha M3000-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Monitor section A C INPUT MASTER B MASTER PFL D L+R E F 1/ 2 ON 2TR IN In this section you can select the signal which will be monitored from the MONITOR OUT jacks and the PHONES jack. The following signals can be selected as monitor sources. Signal sources in priority group 1 can be selected at any time, and signal sources in priority group 2 can be selected only when no signal in group 1 is selected. Signals which can be selected as monitor sources Priority group 1 (can be selected at any time) Priority group 2 (can be selected only when no source of group 1 is selected) • Mono input PFL • Stereo input PFL • MIX AFL • ST bus (ST OUT A/B) AFL • MATRIX AFL • St OUT a • 2TR IN Control panel A INPUT indicator This indicator will light if even one of the input channel PFL switches are turned on. B MASTER indicator This indicator will light if even one of the AFL switches of the mix section, STEREO A section, STEREO B section, or matrix section (page 24) are turned on. C MASTER PFL switch This switch selects the master signal (the signal of either the MAS AFL bus or the MAS PFL bus) which will be monitored by the MONITOR jacks or PHONES jack. When the MASTER PFL switch is on ( ) the signal of the MAS PFL bus will be monitored. When this switch is off ( ), the signal of the MAS AFL bus will be monitored. D L+R switch When this switch is on ( ), the monitor signal which is output from the MONITOR OUT jacks and the PHONES jack will be mixed to a monaural signal. E 1/ 2 select switch This switches between the two sets of 2TR IN jacks located on the rear panel. When the switch is in the upward position ( ) the 2TR IN 1 jacks are selected, and when the switch is in the downward position ( ) the 2TR IN 2 jacks are selected. F ON switch This switch sends the input signal from the set of 2TR IN jacks selected by the 1/2 select switch to the MONITOR jacks and PHONES jack. When this switch is pressed ( ), the input signal from the selected pair of 2TR IN jacks will be sent to the MONITOR jacks and PHONES jack. 19