Yamaha PSR-2700 Owner's Manual - Page 59
Formatting a New Floppy Disk
View all Yamaha PSR-2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
s Formatting a New Floppy Disk The PSR-1700 and PSR-2700 use only 3.5" 2DD floppy disks. Before you can use a new disk for saving data, the disk must be "formatted" as described below. ZInsert the Disk To Be Formatted ... Insert a new blank disk. Make sure that the disk's write protect tab is set to the "write" position (tab closed), and insert the new disk into the disk drive unit with the sliding door facing the drive slot and the label side of the disk facing upward. The disk should click securely into place. When an unformatted disk is properly loaded, "Format?" will appear on the LCD display panel, the ARE YOU SURE? indicator will flash and the PSR-1700/PSR-2700 will ask "Are you sure?". PSR-1700 Format? PSR-2700 08:Showtune 001:GrandPno AccOff Format? DELETE FORMAT NOTES • If an unformatted disk is already in the drive and the format operation was cancelled prior to execution, press the [FORMAT] button to reengage the format function. • The [FORMAT] button can also be used when you want to re-format a formatted disk - to erase all the data it contains, for example. • "Unformatted Disk" will appear on the display if an unformatted writeprotected disk is loaded. Make sure the disk's write protect tab is in the write position before formatting. XConfirm and Format ... YES NO ARE YOU SURE ? Press the [YES] button to confirm and execute the format operation (or press [NO] to cancel). Formatting an entire disk takes a few seconds, and the progress of the operation is shown on the LCD display panel in percent formatted: "0%" through "100%". When the disk has been 100% formatted the format function will be automatically disengaged. PSR-1700 Formatting: 75% PSR-2700 08:Showtune 001:GrandPno AccOff Formatting: 75% NOTES • Be careful not to format a disk that already contains data you want to keep. The format operation erases all data on the floppy disk! • The "Format?" display will also appear if you insert a disk that has been formatted on a piece of equipment other than the PSR-1700 or PSR-2700. CAUTION • Never remove the disk or turn the power off while the "Formatting" display is showing. 57