Yamaha PSR-2700 Owner's Manual - Page 71

q Volume, DSP Depth, & Pan Settings The VOICE section [VOL], [DSP DEPTH], and [PAN] buttons can be used to set the overall volume, DSP depth, and pan position of all four SAMPLE PADS. ZHold [EDIT] and Press [VOICE #] ... ORCHESTRATION L1 R1 EDIT L2 R2 While holding the ORCHESTRATION [EDIT] button press the DIG- VOICE # ITAL SAMPLING section [VOICE #] button. All four SAMPLE PAD indicators will flash and the volume parameter will appear on the LCD display panel. 08:Showtune 001:Sampl001 AccOff Volume=2-1 XSelect & Set the Parameters ... VOL DSP PAN DEPTH Use the [VOL], [DSP DEPTH], and [PAN] buttons to select the parameter you want to adjust, then use the [+] and [-] buttons, the number but- tons, the data dial, or the selected function button itself to set the parameter as required (see page 14 for details on the volume parameter, page 15 for the DSP depth, and page 15 for pan). CExit ... Press any other function button to exit from the parameter adjustment mode. x Individual SAMPLE PAD Volume Settings It is also possible to individually adjust the volume of each pad as follows: ZHold [EDIT] and Select a Pad ... ORCHESTRATION L1 R1 EDIT L2 R2 While holding the ORCHESTRATION [EDIT] button press the SAM- 2 PLE PAD containing the sample you want to adjust. The selected SAMPLE PAD indicator will flash and its current volume value will appear on the LCD display panel. 08:Showtune 001:Sampl001 AccOff Volume=2-1 XSet the Volume ... -+ RESET 012 Use the [+] and [-] buttons, the number buttons, or the data dial to set the volume as required ("0" for no sound through "24" for maximum volume). CExit ...Press any other function button to exit from the individual pad volume adjustment mode. NOTES • The individual volume setting also apply when the sampled voices are played via the keyboard. 69