Yamaha PSR-550 Owner's Manual - Page 140

MIDI Data Format PITCH FINE LEVEL PANPOT REVERB SEND CHORUS SEND VARIATION SEND BnH,63H,19H,62H,rrH,06H,mmH BnH,63H,1AH,62H,rrH,06H,mmH BnH,63H,1CH,62H,rrH,06H,mmH BnH,63H,1DH,62H,rrH,06H,mmH BnH,63H,1EH,62H,rrH,06H,mmH BnH,63H,1FH,62H,rrH,06H,mmH RPN LSB BnH,64H RPN MSB BnH,65H PITCH BEND SENS. BnH,65H,00H,64H,00H,06H,mmH FINE TUNING BnH,65H,00H,64H,01H,06H,mmH, 26H,llH COARSE TUNING BnH,65H,00H,64H,02H,06H,mmH NULL BnH,65H,7FH,64H,7FH ALL SOUND OFF BnH,78H,00H RESET ALL CONTROLLERS BnH,79H,00H ALL NOTES OFF BnH,7BH,00H OMNI OFF BnH,7CH,00H OMNI ON BnH,7DH,00H MONO BnH,7EH POLY BnH,7FH PROGRAM CHANGE CnH CHANNEL AFTER TOUCH DnH PITCH BEND CHANGE EnH SYSTEM EXCLUSIVE MESSAGE UNIVERSAL REALTIME F0H 7FH.....F7H UNIVERSAL NON-REALTIME F0H 7EH.....F7H XG PARAMETER CHANGE F0H 43H 1nH 4CH aaH aaH aaH ddH .....ddH F7H XG BULK DUMP F0H 43H 0nH 4CH bbH bbH aaH aaH aaH ddH.....ddH ccH F7H PARAMETER REQUEST F0H 43H 3nH 4CH aaH aaH aaH F7H DUMP REQUEST F0H 43H 2nH 4CH aaH aaH aaH F7H SPECIAL OPERATORS Others SYSTEM REALTIME MESSAGE MIDI CLOCK F8H START FAH STOP FCH ACTIVE SENSING FEH (3) TRANSMIT/RECEIVE DATA (3-1) CHANNEL VOICE MESSAGES (3-1-1) NOTE OFF (Receive only) STATUS 1000nnnn(8nH) NOTE NUMBER 0kkkkkkk VELOCITY 0vvvvvvv n = 0 - 15 VOICE CHANNEL NUMBER k = 0 (C-2) - 127 (G8) v: ignored (3-1-2) NOTE ON/OFF STATUS 1001nnnn(9nH) NOTE NUMBER 0kkkkkkk VELOCITY 0vvvvvvv 00000000 n = 0 - 15 VOICE CHANNEL NUMBER k = 0 (C-2) - 127 (G8) (v≠0) NOTE ON (v=0) NOTE OFF (3-1-3) PROGRAM CHANGE STATUS 1100nnnn(CnH) PROGRAM NUMBER 0ppppppp n = 0 - 15 VOICE CHANNEL NUMBER p = 0 - 127 * PROGRAM NUMBER: XG DRUM VOICE number correspondence P = 0 Standard Kit P = 1 Standard2 Kit P = 8 Room Kit P = 16 Rock Kit P = 24 Elctrnic Kit P = 25 Analog Kit P = 27 Dance Kit P = 32 Jazz Kit P = 40 Brush Kit P = 48 Symphonic Kit * PROGRAM NUMBER: XG SFX KIT number correspondence P = 0 SFX1 Kit P = 1 SFX2 Kit When DRUM VOICE is selected and program change data for a different DRUM VOICE is received, the currently selected DRUM VOICE will be replaced with the new DRUM VOICE. (3-1-4) CHANNEL AFTER TOUCH (Receive only) STATUS 1101nnnn(DnH) n = 0 - 15 VOICE CHANNEL NUMBER VALUE 0vvvvvvv v = 0 - 127 AFTER TOUCH VALUE (3-1-5) PITCH BEND CHANGE STATUS 1110nnnn(EnH) LSB 0vvvvvvv MSB 0vvvvvvv n = 0 - 15 VOICE CHANNEL NUMBER PITCH BEND CHANGE LSB PITCH BEND CHANGE MSB (3-1-6) CONTROL CHANGE STATUS 1011nnnn(BnH) CONTROL NUMBER 0ccccccc CONTROL VALUE 0vvvvvvv n = 0 - 15 VOICE CHANNEL NUMBER * Transmit CONTROL NUMBER. c = 0 BANK SELECT MSB c = 32 c= 6 c = 38 c= 7 c = 10 c = 64 c = 66 c = 67 c = 72 c = 91 c = 93 c = 94 BANK SELECT LSB DATA ENTRY MSB DATA ENTRY LSB MAIN VOLUME PANPOT SUSTAIN SOSTENUTO SOFT PEDAL RELEASE TIME REVERB SEND LEVEL CHORUS SEND LEVEL VARIATION SEND LEVEL c = 100 RPN LSB c = 101 RPN MSB ; v = 0:XG NORMAL, 64:SFX NORMAL, 126:XG SFX KIT, 127:XG DRUM ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 ; v = 0-63:OFF , 64-127:ON ; v = 0-63:OFF , 64-127:ON ; v = 0-63:OFF , 64-127:ON ; v = 0:-64-64:0-127:+63 ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 (When only Connection = 1[System]) Refer to "(3-3)REGISTERED PARAMETER NUMBER" Refer to "(3-3)REGISTERED PARAMETER NUMBER" * Receive CONTROL NUMBER. c = 0 BANK SELECT MSB c = 32 c= 1 c= 5 c= 6 c = 38 c= 7 c = 10 c = 11 c = 64 c = 65 c = 66 c = 67 c = 71 c = 72 c = 73 c = 74 c = 84 c = 91 c = 93 c = 94 BANK SELECT LSB MODULATION PORTAMENTO TIME DATA ENTRY MSB DATA ENTRY LSB MAIN VOLUME PANPOT EXPRESSION SUSTAIN PORTAMENTO SOSTENUTO SOFT PEDAL HARMONIC CONTENT RELEASE TIME ATTACK TIME BRIGHTNESS PORTAMENT CONTROL REVERB SEND LEVEL CHORUS SEND LEVEL VARIATION SEND LEVEL c = 96 DATA INCREMENT c = 97 DATA DECREMENT c = 98 NRPN LSB c = 99 NRPN MSB c = 100 RPN LSB c = 101 RPN MSB ; v = 0:XG NORMAL, 64:SFX NORMAL, 126:XG SFX KIT, 127:XG DRUM ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 *2 ; v = 0 - 127 *1 ; v = 0 - 127 *1 ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 ; v = 0-63:OFF , 64-127:ON *2 ; v = 0-63:OFF , 64-127:ON *2 ; v = 0-63:OFF , 64-127:ON *2 ; v = 0-63:OFF , 64-127:ON *2 ; v = 0:-64 - 64:0 - 127:+63 ; v = 0:-64 - 64:0 - 127:+63 *2 ; v = 0:-64 - 64:0 - 127:+63 ; v = 0:-64 - 64:0 - 127:+63 ; v = 0 - 127 *2 ; v = 0 - 127 ; v = 0 - 127 ; v = 0 - 127 (When only Connection=1[System]) ; v = 0 - 127 *1 ; v = 0 - 127 *1 Refer to "(3-4)NON-REGISTERED PARAMETER NUMBER" Refer to "(3-4)NON-REGISTERED PARAMETER NUMBER" Refer to "(3-3)REGISTERED PARAMETER NUMBER" Refer to "(3-3)REGISTERED PARAMETER NUMBER" *1 Only when setting the appointed parameter with RPN. *2 Does not effect Rhythm Voice. • Until a PROGRAM CHANGE message is received, the BANK SELECT operation will be suspended. When a Voice, including VOICE BANK, is changed, set the BANK SELECT and Program Change Message, and transmit in the following order, BANK SELECT MSB, LSB, PROGRAM CHANGE. • MODULATION controls the Vibrato Depth. • PORTAMENTO TIME controls the Pitch Change Speed when the Portamento Switch = ON. 0 being the shortest time, and 127 being the longest. • PANPOT changes the value for the melody voice and rhythm voice in relation to the preset value. • Portamento time is fixed to 0 when the PORTAMENTO CONTROL is used. • HARMONIC CONTENT applies adjustment to the resonance value that is set by the voice. 140 148