Yamaha PSR-A3000 PSR-A3000 Owners Manual - Page 178
Calling Up Registration Memory Numbers in Order (Registration Sequence
View all Yamaha PSR-A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Calling Up Registration Memory Numbers in Order (Registration Sequence) As convenient as the Registration Memory buttons are, there may be times during a performance when you want to quickly switch between settings. The convenient Registration Sequence function lets you call up the eight setups in any order you specify, by simply using the TAB [E][F] buttons (in the Main display) or the pedal as you play. 1 If you intend to use a pedal or pedals to switch the Registration Memory number, connect the optional pedals to the appropriate FOOT PEDAL jacks. For instructions, refer to page 93. 2 In the REGISTRATION BANK display, select the desired Bank to be programmed. 3 Call up the operation display. [FUNCTION] TAB [E] MENU 1 [C] REGIST SEQUENCE/FREEZE TAB [E] REGISTRATION SEQUENCE 4 If you use a pedal, specify here how the pedal will be used-to advance or to reverse through the sequence. Use the [B] or [C] button to select the pedal for advancing or reversing through the Registration Sequence. For example, if two pedals are connected, Pedal 1 is used for advancing while Pedal 2 is used for reversing. Note that the pedal settings here (other than OFF) will take priority over the settings in the FOOT PEDAL display (page 191). If you want to use the pedal for a function other than Registration Sequence, make sure to set this to OFF. Indicates the name of the currently selected Registration Memory Bank. 7 4 6 5 Program the Sequence order, from left to right. Press one of the REGISTRATION MEMORY [1]-[8] buttons on the panel, then press the [6 ] (INSERT) button to input the number. Indicates the Registration Memory numbers, in the order of the current Registration Sequence. 178 PSR-A3000 Owner's Manual