Yamaha PSR-A3000 PSR-A3000 Owners Manual - Page 179

[1 ]- [4 ] [5 ] REPLACE [6 ] INSERT [7 ] [8 ] DELETE CLEAR Moves the cursor. Replaces the number at the cursor position with the currently selected Registration Memory number. Inserts the number of the currently selected Registration Memory number to the cursor position. Deletes the number at the cursor position. Deletes all numbers in the sequence. 6 Use the [D] (SEQUENCE END) button to determine how Registration Sequence behaves when reaching the end of the sequence. • STOP Pressing the TAB [F] button or the "advance" pedal has no effect. The sequence is "stopped." • TOP The sequence starts again at the beginning. • NEXT BANK .....The sequence automatically moves to the beginning of the next Registration Memory Bank in the same folder. 7 Press the [F] (REGIST SEQ. ENABLE) button to turn the Registration Sequence function on. 8 Press the [EXIT] button to exit from the operation display. After the confirmation message appears, press the [G] (YES) button to store the Registration Sequence program temporarily. NOTICE Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you've saved it with the Registration Memory Bank file. For instructions on saving, see the section below. 7 Registration Memory Saving the Registration Sequence Settings The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your newly programmed Registration Sequence, save the current Registration Memory Bank file. 1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the REGISTRATION BANK Selection display. 2 Press the [6 ] button of MENU 2 to save the Bank file. For details, refer to page 28. PSR-A3000 Owner's Manual 179