Yamaha PSR-A5000 PSR-A5000 Owners Manual - Page 30
Display-based Controls, Using the display touch screen
View all Yamaha PSR-A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Display-based Controls The display of this instrument is a special touch screen that allows you to select or change the desired parameter by simply touching the corresponding setting on the display. You can also decrease/increase the value in small steps by rotating the Data dial or pressing the [DEC]/[INC] button. Using the display (touch screen) NOTICE Do not use any sharp or hard tools to operate the touch screen. Doing so may damage the display. NOTE Keep in mind that operation by simultaneously touching two or more points on the display is not possible. Touch To select an item, lightly touch the corresponding indication on the display. NOTE If you find the system sounds (produced when touching the display) distracting, you can turn them on/off from [MENU] [Utility] [Touch Screen/ Display] Touch Screen [Sound] Slide Hold down the display slider, and then slide your finger vertically or horizontally to change the parameter value. NOTE In the case of a vertical slider, the slide operation is only effective for the slider when it is selected. To select a slider, touch it once. The selected state is indicated by a surrounding orange frame. Rotate Touch and hold the display knob, and rotate your finger around the knob to change the parameter value. NOTE The rotate operation is only effective for the knob when it is selected. To select a knob, touch it once. The selected state is indicated by a surrounding orange frame. Touch and hold This instruction means to touch the object in the display and hold it for a while. When setting values by using the buttons, a slider or a knob, you can restore the default value by touching and holding the value on the display. 30 PSR-A5000 Owner's Manual