Yamaha QY70 Owner's Manual - Page 126
Curve, when the job is done. Press the [EXIT] key to return to the job list, or
View all Yamaha QY70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
The Song Jobs The "Curve" parameter sets the degree of positive or negative "curvature" that will be applied to the continuous data: "-16" ... "00" ... "+16". Curve = +16 Curve = 0 (linear) End point Start point Curve = -16 Clock parameter After setting the parameters as required press [ENTER] to execute the Create Continuous job. The metronome icon will appear on the display while the data is being processed, then "Completed" will appear briefly when the job is done. Press the [EXIT] key to return to the job list, or a mode key to go directly to the selected mode. 124
124
T h e
S o n g
J o b s
The “
Curve
” parameter sets the degree of positive or negative
“curvature” that will be applied to the continuous data: “-16” … “00” …
“+16”.
After setting the parameters as required press [ENTER] to execute
the Create Continuous job. The metronome icon will appear on the display
while the data is being processed, then “Completed” will appear briefly
when the job is done. Press the [EXIT] key to return to the job list, or a
mode key to go directly to the selected mode.
Start point
End point
Curve = +16
Curve = 0 (linear)
Curve = -16
Clock
parameter