Yamaha QY70 Owner's Manual - Page 168
mode key to go directly to the selected mode., parameter allows you to change all gate time values
View all Yamaha QY70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
The Pattern Jobs The "Offset" parameter allows you to change all gate time values by an absolute amount. "-" settings will decrease the gate time of each note by the corresponding amount, "+" settings will increase the gate time accordingly. The range is from "-9999" through "0" to "+9999". Original gate time 32 32 32 48 48 Offset = -20 12 12 12 28 28 Offset = +20 52 52 52 68 68 New Gate Time = Original Gate Time x rate/100 + offset (If the right side of the equation is 0 or less, the New Gate Time becomes 1) After setting the parameters as required press [ENTER] to execute the Modify Gate Time job. The metronome icon will appear on the display while the data is being processed, then "Completed" will appear briefly when the job is done. Press the [EXIT] key to return to the job list, or a mode key to go directly to the selected mode. s NOTE • The Modify Gate Time job can be used to produce a more staccato or legato feel, as required. Experiment with the parameters to get a feel for what they do. 166