Yamaha QY70 Owner's Manual - Page 167
: Modify Gate Time
View all Yamaha QY70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
The Pattern Jobs 03 : Modify Gate Time Increases or decreases the gate times (length) of all notes in the specified track and range of measures. First measure. Last measure. First beat. Last beat. The "TR" parameter selects the track to be affected by the Modify , Gate Time job: D1, D2, PC, BA, C1, C2, C3, C4. The "M" parameters above the graphic bar are used to specify the first measure:beat and last measure:beat of the range to be modified. The "SetAll" parameter makes it possible to set all notes in the specified range to a single gate time value from "1" to "9999". "Set All" can also be turned "Off" when the "Rate" and "Offset" parameters, 11 below, are to be used for gate time modification. The "Rate" parameter allows you to change the Gate Time value of each note without affecting the gate time ratios between notes (propor- tional change). A setting of "100%" maintains the absolute gate time differences between notes, while lower (higher) values will decrease (increase) the gate time values to the corresponding percentage. The range is from "0%" to "200%". Original gate time 32 32 32 48 48 Rate = 50% 16 16 16 24 24 Rate = 150% 48 48 48 72 72 165