Yamaha R-N303D R-N303/R-N303D Owner s Manual - Page 21
Sharing the iOS device setting, ¡WPS, WIRELESS - firmware update
View all Yamaha R-N303D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PREPARATION Connecting to a network ■ Connecting without a wired router or wireless router (access point) Connecting wirelessly to a mobile device (Wireless Direct) Connect wirelessly with Wireless Direct (p. 17) Note When the unit is connected to the network with Wireless Direct, it cannot connect to any other wireless router (access point). To play back contents from the Internet or to update the firmware of this unit over the network, connect the unit to a network with a wired router or wireless router (access point). Sharing the iOS device setting You can easily setup a wireless connection by applying the connection settings on iOS devices (iPhone/iPad/iPod touch). Before proceeding, confirm that your iOS device is connected to a wireless router (access point). Note • If you perform the following procedure, all network settings will be initialized. • This configuration does not work if the security protocol of your wireless router (access point) is WEP. In this case, use another connection method. 5 Use the cursor keys (S / T) to select "Share Setting" and then press ENTER twice. Note When connected to a wired network, the front display will show the messages "LAN CBL" and "Pls disconnect". Unplug the network cable from the unit, and press the ENTER key. 6 On the iOS device, select the unit as the AirPlay speaker in the Wi-Fi screen. Example (iOS 10) CLEAR MODE DISPLAY Cursor keys S / T ENTER SETUP ENTER HOME RETURN SETUP VOLUME OPTION NOW PLAYING MUTE RETURN 1 Press SETUP. 2 Use the cursor keys (S / T) to select "Network" and press ENTER. Note To return to the previous state, press RETURN. 3 Use the cursor keys (S / T) to select "Connection" and press ENTER. 4 Use the cursor keys (S / T) to select "Wireless" and press ENTER. WIRELESS ¡WPS The name of this unit 7 Check that the "Network" field is set to your preferred network, and then tap "Next". Tap here to start setup The network currently selected When the sharing process finishes, the unit is automatically connected to the selected network (access point). When the setting finishes, verify whether the unit is connected to a wireless network (p. 18). English 15 En