Yamaha R-N602 Owners Manual - Page 49

Network Configures the network settings. ■ Connection Selects the network connection method. Wired Wireless WirelessDirect Extend Select this option when you want to connect the unit to a network with a commerciallyavailable network cable (p. 15). Select this option when you want to connect the unit to a network via the wireless router or access point (p. 16, 17, 18). Select this option when you want to connect a mobile device to the unit directly. For details on settings, see "Connecting a mobile device to the unit directly (Wireless Direct)" (p. 19). Displays connection method of the MusicCast Network. ■ Information Displays the network information on the unit. NewFwAvailable Appears if an update for this unit's firmware is available (p. 50). STATUS The connection status of the network. MC NET Status of the MusicCast Network. If "Ready" appears, you can use the MusicCast CONTROLLER app. MAC Displays MAC address of the unit. MAC address will vary depending on the connection method (wired LAN connection or wireless LAN / Wireless Direct connection). SSID (When using wireless LAN connection or Wireless Direct ) The SSID of this unit on the wireless network. IP IP address SUBNET Subnet mask GATEWAY The IP address of the default gateway DNS P The IP address of the primary DNS server DNS S The IP address of the secondary DNS server VTUNER The ID of the Internet radio (vTuner) ■ IP Address Configures the network parameters (such as IP address). DHCP Select whether to use a DHCP server. Off On (default) Does not use a DHCP server. Configure the network parameters manually. For details, see "Manual network settings". Uses a DHCP server to automatically obtain the unit's network parameters (such as IP address). Configuring various functions (Setup menu) Manual network settings 1 Set "DHCP" to "Off". 2 Use the cursor keys (B / C) to select a parameter type. IP SUBNET GATEWAY DNS P DNS S Specifies an IP address. Specifies a subnet mask. Specifies the IP address of the default gateway. Specifies the IP address of the primary DNS server. Specifies the IP address of the secondary DNS server. 3 Use the cursor keys (D / E) to select the edit position. NETWORK A Address1•••192 (Example: IP address setting) Use the cursor keys (D / E) to switch between segments (Address1, Address2...) of the address. 4 Use the Cursor keys (B / C) to change a value. 5 To exit from the menu, press SETUP. ■ DMC Control Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback. Disable Enable (default) Does not allow DMCs to control playback. Allows DMCs to control playback. y A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network. ■ Standby (Network Standby) Selects whether the unit can be turned on from other network devices (network standby). Off On Auto (Default) Disables the network standby function. Enables the network standby function. (The unit consumes more power than when "Off" is selected.) Enables the network standby function. The unit is set to the power saving mode when the unit is disconnected from the network. ADVANCED OPERATION English 45 En