Yamaha R-N602 Owners Manual - Page 63

Specifications - canada

Page 63 highlights

Specifications Network • Input jack: NETWORK x 1 (100Base-TX/10Base-T) • PC client function • Compatible with DLNA ver. 1.5 • AirPlay supported • Internet radio • Streaming service • Wi-Fi function Capable of WPS Capable of sharing with iOS devices by wireless connection and USB connection Capable of direct connection with mobile device Available security method: WEP, WPA2-PSK (AES), Mixed Mode Radio frequency band: 2.4 GHz Wireless network standard: IEEE 802.11 b/g/n Bluetooth • Source function This unit to sink device (ex. Bluetooth headphone) Supported codec SBC • Sink function Source device to this unit (ex. smartphone/tablet) Supported codec SBC, AAC • Capable of play/stop operation from sink device • Bluetooth version Ver. 2.1+EDR • Supported profile A2DP, AVRCP • Wireless output Bluetooth Class 2 • Maximum communication distance 10 m (33 ft) without interference USB • Input jack: USB x 1 (USB2.0) • Capable of iPod, mass storage class USB memory • Current supply capacity: 1.0 A Audio • Minimum RMS output power (20 Hz to 20 kHz, 0.04% THD, 8 80 W + 80 W • Dynamic power per channel (IHF) (8/6/4/2 105/125/150/178 W • Maximum power per channel (1 kHz, 0.7% THD, 4 Ω) [U.K. and Europe models 105 W • IEC power (1 kHz, 0.04% THD, 8 Ω) [U.K. and Europe models 84 W • Power band width (main L/R) (0.06%THD 40.0 W, 8 10 Hz to 50 kHz • Damping factor (SPEAKERS A) 1 kHz, 8 150 or more • Maximum effective output power (JEITA) (1 kHz, 10% THD, 8 ) [Asia and General models 115 W • Input sensitivity/input impedance PHONO (MM 3.5 mV/47 kΩ CD, etc 200 mV/47 k • Maximum input signal PHONO (MM) (1 kHz, 0.003% THD 60 mV or more CD, etc. (1 kHz, 0.5% THD 2.2 V or more • Output level/output impedance CD, etc. (input 1 kHz, 200 mV) OUT 200 mV/1.1 k SUBWOOFER PRE OUT 4.0 V / 1.2 kΩ (Cut off frequency 90 Hz PHONES (8  load 410 mV/470  • Frequency response CD, etc. (20 Hz to 20 kHz 0 ± 0.5 dB CD, etc. (10 Hz to 100 kHz, PURE DIRECT on) .........0 ± 1.0 dB • RIAA equalization deviation PHONO (MM 0.5 dB • Total harmonic distortion PHONO (MM) to OUT (20 Hz to 20 kHz, 3 V 0.025% or less CD, etc. to SPEAKERS (20 Hz to 20 kHz, 40.0 W, 8 0.015% or less • Signal to noise ratio (IHF-A Network) PHONO (MM) (input shorted, 5 mV 87 dB or more CD, etc. (input shorted, 200 mV 100 dB or more • Residual noise (IHF-A network 30 µV • Channel separation CD, etc. (5.1 k input shorted, 1/10 kHz) ..........65/50 dB or more • Tone control characteristics BASS Boost/cut (20 Hz 10 dB Turnover frequency 350 Hz TREBLE Boost/cut (20 kHz 10 dB Turnover frequency 3.5 kHz • Continuous loudness control Attenuation 1 kHz 30 dB • Gain tracking error (+16.5 to -80 dB 0.5 dB or less • Digital input (OPTICAL/COAXIAL) Support audio sample rate ...........32/44.1/48/88.2/96/176.4/192 kHz FM • Tuning range [U.S.A. and Canada models 87.5 to 107.9 MHz [Asia and General models] .........87.5/87.50 to 108.0/108.00 MHz [U.K., Europe, Korea, Australia models] ..... 87.50 to 108.00 MHz • 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.) Mono 3.0 µV (20.8 dBf) • Signal to noise ratio (IHF) Mono/stereo 65 dB/64 dB • Harmonic distortion (1 kHz) Mono/stereo 0.5%/0.6% • Antenna input 75 W unbalanced AM • Tuning range [U.S.A. and Canada models 530 to 1710 kHz [Asia and General models 530/531 to 1710/1611 kHz [U.K, Europe, Korea, Australia models 531 to 1611 kHz General • Power supply [U.S.A. and Canada models AC 120 V, 60 Hz [General model AC 110-120/220-240 V, 50/60 Hz [Korea model AC 220 V, 60Hz [Australia model AC 240 V, 50 Hz [U.K. and Europe models AC 230 V, 50 Hz [Asia model AC 220-240 V, 50/60 Hz • Power consumption 190 W • Off mode 0.1 W • Standby power consumption (reference data 0.1 W • Network Standby on Wired 1.7 W Wireless (Wi-Fi/Wireless Direct/Bluetooth) ....1.8 W/1.9 W/1.6 W • Maximum power consumption (1 kHz, 8 Ω, 10% THD) [U.K., Australia, Asia and General models 380 W • Dimensions (W  H  D 435  151  392 mm (17-1/8"  6"  15-7/16") • Weight 9.8 kg (21.6 lbs) * Specifications are subject to change without notice. ADDITIONAL INFORMATION English 59 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

59
En
English
ADDITIONAL
INFORMATION
Network
Input jack: NETWORK x 1 (100Base-TX/10Base-T)
PC client function
Compatible with DLNA ver. 1.5
AirPlay supported
Internet radio
Streaming service
Wi-Fi function
Capable of WPS
Capable of sharing with iOS devices by wireless connection and
USB connection
Capable of direct connection with mobile device
Available security method: WEP, WPA2-PSK (AES), Mixed Mode
Radio frequency band: 2.4 GHz
Wireless network standard: IEEE 802.11 b/g/n
Bluetooth
Source function
This unit to sink device (ex.
Bluetooth
headphone)
Supported codec
..........................................................................
SBC
Sink function
Source device to this unit (ex. smartphone/tablet)
Supported codec
................................................................
SBC, AAC
Capable of play/stop operation from sink device
Bluetooth
version
.........................................................
Ver. 2.1+EDR
Supported profile
.......................................................
A2DP, AVRCP
Wireless output
......................................................
Bluetooth
Class 2
Maximum communication distance
.......................................................
10 m (33 ft) without interference
USB
Input jack: USB x 1 (USB2.0)
Capable of iPod, mass storage class USB memory
Current supply capacity: 1.0 A
Audio
Minimum RMS output power
(20 Hz to 20 kHz, 0.04% THD, 8
)
........................
80 W + 80 W
Dynamic power per channel (IHF)
(8/6/4/2
)
............................................................................
105/125/150/178 W
Maximum power per channel (1 kHz, 0.7% THD, 4
)
[U.K. and Europe models]
....................................................
105 W
IEC power (1 kHz, 0.04% THD, 8
)
[U.K. and Europe models]
......................................................
84 W
Power band width (main L/R)
(0.06%THD 40.0 W, 8
)
......................................
10 Hz to 50 kHz
Damping factor (SPEAKERS A)
1 kHz, 8
..................................................................
150 or more
Maximum effective output power (JEITA)
(1 kHz, 10% THD, 8
)
[Asia and General models]
...................................................
115 W
Input sensitivity/input impedance
PHONO (MM)
..........................................................
3.5 mV/47 k
CD, etc.
..................................................................
200 mV/47 k
Maximum input signal
PHONO (MM) (1 kHz,
0.003% THD)
..................
60 mV or more
CD, etc. (1 kHz, 0.5% THD)
....................................
2.2 V or more
Output level/output impedance
CD, etc. (input 1 kHz, 200 mV)
OUT
....................................................................
200 mV/1.1 k
SUBWOOFER PRE OUT
.....................................
4.0 V / 1.2 k
(Cut off frequency)
............................................................
90 Hz
PHONES (8
load)
............................................
410 mV/470
Frequency response
CD, etc. (20 Hz to 20 kHz)
............................................
0 ± 0.5 dB
CD, etc. (10 Hz to 100 kHz, PURE DIRECT on)
.........
0 ± 1.0 dB
RIAA equalization deviation
PHONO (MM)
..................................................................
± 0.5 dB
Total harmonic distortion
PHONO (MM) to OUT
(20 Hz to 20 kHz, 3 V)
.........................................
0.025% or less
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 40.0 W, 8
)
...........................
0.015% or less
Signal to noise ratio (IHF-A Network)
PHONO (MM) (input shorted, 5 mV)
......................
87 dB or more
CD, etc. (input shorted, 200 mV)
...........................
100 dB or more
Residual noise (IHF-A network)
.............................................
30 μV
Channel separation
CD, etc. (5.1 k
input shorted, 1/10 kHz)
..........
65/50 dB or more
Tone control characteristics
BASS
Boost/cut (20 Hz)
...........................................................
± 10 dB
Turnover frequency
...........................................................
350 Hz
TREBLE
Boost/cut (20 kHz)
.........................................................
± 10 dB
Turnover frequency
..........................................................
3.5 kHz
Continuous loudness control
Attenuation 1 kHz
................................................................
-30 dB
Gain tracking error (+16.5 to -80 dB)
..........................
0.5 dB or less
Digital input (OPTICAL/COAXIAL)
Support audio sample rate
...........
32/44.1/48/88.2/96/176.4/192 kHz
FM
Tuning range
[U.S.A. and Canada models]
............................
87.5 to 107.9 MHz
[Asia and General models]
.........
87.5/87.50 to 108.0/108.00 MHz
[U.K., Europe, Korea, Australia models]
.....
87.50 to 108.00 MHz
50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)
Mono
.................................................................
3.0 μV (20.8 dBf)
Signal to noise ratio (IHF)
Mono/stereo
................................................................
65 dB/64 dB
Harmonic distortion (1 kHz)
Mono/stereo
..................................................................
0.5%/0.6%
Antenna input
.........................................................
75 W unbalanced
AM
Tuning range
[U.S.A. and Canada models]
...............................
530 to 1710 kHz
[Asia and General models]
..................
530/531 to 1710/1611 kHz
[U.K, Europe, Korea, Australia models]
...............
531 to 1611 kHz
General
Power supply
[U.S.A. and Canada models]
...............................
AC 120 V, 60 Hz
[General model]
.......................
AC 110-120/220-240 V, 50/60 Hz
[Korea model]
.......................................................
AC 220 V, 60Hz
[Australia model]
................................................
AC 240 V, 50 Hz
[U.K. and Europe models]
..................................
AC 230 V, 50 Hz
[Asia model]
..........................................
AC 220-240 V, 50/60 Hz
Power consumption
.................................................................
190 W
Off mode
..................................................................................
0.1 W
Standby power consumption (reference data)
..........................
0.1 W
Network Standby on
Wired
.....................................................................................
1.7 W
Wireless (Wi-Fi/Wireless Direct/
Bluetooth
)
....
1.8 W/1.9 W/1.6 W
Maximum power consumption (1 kHz, 8
, 10% THD)
[U.K., Australia, Asia and General models]
........................
380 W
Dimensions (W
H
D)
.................................
435
151
392 mm
(17-1/8”
6”
15-7/16”)
• Weight
......................................................................
9.8 kg (21.6 lbs)
* Specifications are subject to change without notice.
Specifications