Yamaha RX-V2200 Owner'w Manual - Page 34

BASIC PLAYBACK AUTO: Disc6.1: Mtrx6.1: OFF: This mode automatically switches Dolby Digital Matrix 6.1/DTS ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the input source that this unit can detect. Rear center speaker does not work for 5.1 channel sources. This mode can be selected only when the source with DTS ES Discrete format has been detected. This mode makes 6-channel playback of the input source through the Matrix 6.1 decoder. Rear center speaker does not work in this mode. I Virtual CINEMA DSP and SILENT CINEMA DSP Virtual CINEMA DSP With the Virtual CINEMA DSP, you can enjoy all the DSP programs without rear speakers. It creates the virtual speakers to reproduce the natural sound field. The sound field processing is changed to the Virtual CINEMA DSP mode according to the selected DSP program by setting "1C REAR L/R SP" on the SET MENU to NONE. Note • This unit is not set in the virtual CINEMA DSP mode even if "1C REAR L/R SP" is set to NONE in the following cases: - when the 6ch Stereo, DOLBY DIGITAL Normal, Pro Logic , DTS Normal or Neo: 6 program is selected; - when the sound effect is turned off; - when 6CH INPUT is selected as the input source; - when 96-kHz sampling digital signals are input to this unit; - when using the test tone; or - when connecting the headphones. SILENT CINEMA DSP You can enjoy the powerful sound field as if there were actual speakers with the SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Enjoy all the DSP program using the headphones. The "SILENT" indicator lights up on the front panel display. (If the sound effect is off, you listen to the source with normal stereo reproduction.) Note • This unit is not set in the SILENT CINEMA DSP mode even if the sound effect is on; - when 96-kHz sampling digital signals are input to this unit. I Normal Stereo Reproduction Press STEREO to turn off the sound effect for normal stereo reproduction. Press STEREO again to turn the sound effect back on. STEREO EFFECT STEREO or EFFECT Front panel Remote control Notes • If you turn off the sound effect, no sound is output from the center speaker, rear speakers and rear center speaker. • If you turn off the sound effect while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the main speakers. • The volume may be greatly reduced when you turn off the sound effect or if you set "11 D-RANGE" on the SET MENU to MIN. In this case turn on the sound effect. I Displaying the information about the input source You can display the information such as the type, format and sampling frequency of the signal input from the component connected to this unit. 1 Select the input source you want to obtain the information about by pressing an input selector button. PHONO V-AUX TUNER MD/TAPE CD-R CD D-TV/LD CBL/SAT VCR 1 VCR2/DVR DVD 2 Press STEREO to light STEREO. STEREO EFFECT 3 Press k/n to display the information about the input signal. ON SCREEN LEVEL SLEEP TEST PARAMETER SET MENU 30