Yamaha RX-V2200 Owner'w Manual - Page 73

INTRODUCTION PREPARATION BASIC OPERAIONT I Special considerations when using DTS software The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to the second room, you will only be able to hear the digital noise sound that could damage your speakers. Due to this characteristic of DTS encoded discs, the following considerations and adjustments need to be made. For LDs or DVDs encoded with DTS Only 2-channel analog audio signals may be sent to the second room, as follows: • LDs Set your LD player's left and right outputs to the analog soundtrack. • DVDs Use the disc menu to set the DVD player's mixed 2channel left and right audio outputs to the PCM or Dolby Digital soundtrack. For CDs encoded with DTS DO NOT USE the Zone 2 feature for CDs encoded with DTS to avoid unexpected noise. Remote Control in Zone 2 In the second room (Zone 2), the supplied remote control can be used for the Zone 2 remote control. You can select the input source and control the component which is located in the main room directly from the second room regardless of the listening condition in the main room. Before starting the following procedure, set REC OUT/ ZONE 2 on the front panel to SOURCE/REMOTE. 1 Repeat steps 1 and 2 of the procedure in "Setting the Manufacturer Code" on page 43. 2 Press l / h to select "L:AMP". ENTER ZONE 2 5 Press SOURCE SELECT k to display "Zone2" in the display window. SOURCE SELECT 6 Press an input selector button to select the input source you want to listen to in the second room. The display window shows "2: name of selected input" if the remote control is in the Zone 2 mode. PHONO V-AUX TUNER MD/TAPE CD-R CD D-TV/LD CBL/SAT VCR 1 VCR2/DVR DVD 7 You can control the component by using the component control area buttons. TITLE 6CH INPUT SOURCE DISPLAY MENU SELECT SEARCH ENTER SOUND - CHAPTER + POWER REC STOP PAUSE PLAY 10KEY DSP HALL 1 HALL 2 1 2 ROCK ENTER- CONCERT TAINMENT 5 6 MOVIE MOVIE 6.1/ES THEATER 1 THEATER 2 9 10 CHP/INDEX 0 CHURCH 3 TV SPORTS 7 /DTS SUR. 11 +10 JAZZ CLUB 4 MONO MOVIE 8 SELECT 12 +100 A/B/C/D/E PRESET TV INPUT TV VOL CH TV MUTE MUTE STEREO VOLUME DISC EFFECT Note • Adjust the Zone 2 volume with the control on the amplifier in the second room. 8 Press SOURCE SELECT k / n to exit from the Zone 2 mode. 3 Press k / n to select "Zone2". ENTER SOURCE SELECT 4 Press LEARN to complete the Zone 2 setup. LEARN ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 69