Yamaha YSP 1000 Owner's Manual - Page 87

ADJUSTING SYSTEM PARAMETERS 4 Press / to switch between PRESET: RESET and PRESET: CANCEL. ENTER VOL PRESET: RESET VOL PRESET: CANCEL • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. 5 Press STANDBY/ON on the front panel or on the remote control to set this unit to the standby mode. STANDBY/ON or Front panel Remote control The new setting will be activated when you turn on the power of this unit next time. Adjusting the audio balance You can adjust the sound beam output level of each speaker by using the test tone or the audio output being played back in each beam mode to achieve a more true-tolife surround sound experience. y If the level of a particular speaker cannot be adjusted, "- -dB" appears in the front panel display. ■ Using the test tone You can use the test tone feature to output a test tone from each speaker to manually balance the speaker levels. Use the test tone to set speaker levels so that the volume level of each speaker is identical when heard from your listening position. Notes • All the speaker levels cannot be adjusted when the stereo mode or the target mode is selected as the beam mode (see page 44). • FRONT L/R cannot be adjusted when the stereo plus 3 mode is selected as the beam mode (see page 43). SPORTS 0 OFF +10 SURROUND CH LEVEL CINEMA DSP MENU TEST ENTER RETURN 1 Press TEST on the remote control. TEST LEFT appears in the front panel display and a test tone is output from the front left speaker. TEST VOL TEST LEFT ADVANCED OPERATION 83