Yamaha YSP 1000 Owner's Manual - Page 98
Problem, Cause, Remedy, components with this unit's
UPC - 027108924274
View all Yamaha YSP 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
TROUBLESHOOTING ■ Remote control Problem Cause Remedy The remote control does not work and/or function properly. You cannot operate external components with this unit's remote control. The cursor buttons do not work during SET MENU operation. Wrong distance or angle. The remote control will function within a maximum range of 6 m and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. The batteries are weak. Replace all batteries. The external component you want to operate is not selected as the input source. Press INPUT on the front panel or the input selector buttons on the remote control to select the external component you want to operate. The remote control code was not correctly set. Set the remote control code correctly or try another code for the same manufacturer using the "LIST OF REMOTE CONTROL CODES" at the end of this manual. Even if the remote control code is correctly set, there are some models that do not respond to the remote control. Use the remote control supplied with the external component. You pressed an input selector button. Press TEST once. See page 24 - 24 39 87 - - 94