Zanussi ZOB35301XK Product Manaul - Page 15

lation the surface of the glass panel frame on the screen-printing zones is not rough when you touch it. Make sure that you install the internal glass panel in the seats correctly. Refer to the illustration. What to do if... Warning! Refer to the Safety chapters. Problem The oven does not heat up. The oven does not heat up. The oven does not heat up. The oven does not heat up. Possible cause The appliance is deactivated. The clock is not set. The necessary settings are not set. The fuse in the fuse box is released. The oven lamp does not operate. The display shows 12.00. Steam and condensation settle on the food and in the oven. The oven lamp is defective. There was a power cut. You left the dish in the oven for too long. Remedy Activate the appliance. Set the clock. Make sure that the settings are correct. Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician. Replace the oven lamp. Set the clock. Do not keep the dishes in the oven for longer than 15 - 20 minutes after the cooking ends. If you cannot find a solution to the problem yourself, contact your dealer or the service centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) ... Installation Warning! Refer to the Safety chapters. www.zanussi.com 15