ZyXEL GS-105I User Guide - Page 131
Public LAN, Network Setting > Home Networking, > Additional Subnet, LABEL,
View all ZyXEL GS-105I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 8 Home Networking with the Zyxel Device itself as the gateway for the LAN network. When you use IP alias, you can also configure firewall rules to control access to the LAN's logical network (subnet). If your ISP provides the Public LAN service, the Zyxel Device may use a LAN IP address that can be accessed from the WAN. Click Network Setting > Home Networking > Additional Subnet to display the screen shown next. Figure 70 Network Setting > Home Networking > Additional Subnet The following table describes the labels in this screen. Table 34 Network Setting > Home Networking > Additional Subnet LABEL DESCRIPTION IP Alias Setup Group Name Select the interface group name for which you want to configure the IP alias settings. See Chapter 15 on page 192 for how to create a new interface group. Active Click this switch to configure a LAN network for the Zyxel Device. When the switch goes to the right , the following fields will be configurable. Otherwise, they are not. IPv4 Address Subnet Mask Enter the IP address of your Zyxel Device in dotted decimal notation. Your Zyxel Device will automatically calculate the subnet mask based on the IPv4 address that you assign. Unless you are implementing subnetting, use this value computed by the Zyxel Device. Public LAN Active Click this switch to enable or disable the Public LAN feature. When the switch goes to the right , the function is enabled. Otherwise, it is not. Your ISP must support Public LAN and static IP. IPv4 Address Subnet Mask Enter the public IP address provided by your ISP. Enter the public IPv4 subnet mask provided by your ISP. PX7511-B0 User's Guide 131