ZyXEL GS-105I User Guide - Page 139
Label, Description
View all ZyXEL GS-105I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Chapter 9 Routing Figure 77 Network Setting > Routing > Static Route: Add/Edit The following table describes the labels in this screen. Table 39 Network Setting > Routing > Static Route: Add/Edit LABEL DESCRIPTION Active Route Name IP Type Destination IP Address Subnet Mask Use Gateway IP Address Click this switch to enable or disable this static route. When the switch goes to the right function is enabled. Otherwise, it is not. Enter a descriptive name for the static route. Select whether your IP type is IPv4 or IPv6. Enter the IPv4 or IPv6 network address of the final destination. , the If you are using IPv4 and need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. Enter the IP subnet mask here. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. Gateway IP Address Use Interface Cancel Apply Click this switch to enable or disable the gateway IP address. When the switch goes to the right , the function is enabled. Otherwise, it is not. Enter the IP address of the gateway. Select the WAN interface you want to use for this static route. Click Cancel to exit this screen without saving. Click Apply to save your changes. PX7511-B0 User's Guide 139