ZyXEL GS-105I User Guide - Page 83
Bridge Mode
View all ZyXEL GS-105I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 6 Broadband Table 17 Network Setting > Broadband > Add/Edit New WAN Interface (Routing Mode) LABEL DESCRIPTION Select Manually Configured if you have the IPv4 address of the relay server. Otherwise, select Automatically configured by DHCPC to have the Zyxel Device detect it automatically through DHCP. The Automatically configured by DHCPC option is configurable only when you set the method of encapsulation to IPoE. Service Provider Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP's border relay router and connecting to IPv6 Prefix the native IPv6 Internet. IPv4 Mask Length Enter the subnet mask number (1~32) for the IPv4 network. Border Relay IPv4 Address When you select Manually Configured, specify the relay server's IPv4 address in this field. IPv6 IA_PD and IA_NA (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field.) Prefix Delegation Click this switch to use DHCP PD (Prefix Delegation) which enables the Zyxel Device to pass the IPv6 prefix information to its LAN hosts. The hosts can then use the prefix to generate their IPv6 addresses. IPv6 Address From DHCPv6 Server When the switch goes to the right , the function is enabled. Otherwise, it is disabled. Click this switch to obtain an IPv6 address from a DHCPv6 server. The IP address assigned by a DHCPv6 server has priority over the IP address automatically generated by the Zyxel Device using the IPv6 prefix from a Router Advertisement (RA). Cancel Apply When the switch goes to the right , the function is enabled. Otherwise, it is disabled. Click Cancel to restore your previously saved settings. Click Apply to save your changes. 6.2.1.2 Bridge Mode Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the connection you want to configure. The following example screen displays when you select the Bridge mode. Figure 46 Network Setting > Broadband > Add/Edit New WAN Interface (Bridge Mode) PX7511-B0 User's Guide 83