ZyXEL GS-105I User Guide - Page 69
Label, Description
View all ZyXEL GS-105I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 34 LAN Chapter 5 Connection Status Click the Arrow icon ( ) to open the following screen. Use this screen to configure the LAN IP address and DHCP setting for your Zyxel Device. Figure 35 LAN Setup Each field is described in the following table. Table 11 Status Screen LABEL DESCRIPTION LAN IP Setup IP Address Enter the LAN IPv4 address you want to assign to your Zyxel Device in dotted decimal notation, for example, 192.168.1.1 (factory default). Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your Zyxel Device automatically computes the subnet mask based on the IP address you enter, so do not change this field unless you are instructed to do so. IP Addressing Values Beginning IP Address This field specifies the first of the contiguous addresses in the IP address pool. Ending IP Address This field specifies the last of the contiguous addresses in the IP address pool. DHCP Server State PX7511-B0 User's Guide 69