ZyXEL GS-105I User Guide - Page 98

Chapter 7 Wireless The following table describes the labels in this screen. Table 25 Network Setting > Wireless > MAC Authentication LABEL DESCRIPTION General SSID MAC Restrict Mode Select the SSID for which you want to configure MAC filter settings. Define the filter action for the list of MAC addresses in the MAC Address table. Select Disable to turn off MAC filtering. Select Deny to block access to the Zyxel Device. MAC addresses not listed will be allowed to access the Zyxel Device. Select Allow to permit access to the Zyxel Device. MAC addresses not listed will be denied access to the Zyxel Device. MAC Address List Add New MAC Address This field is available when you select Deny or Allow in the MAC Restrict Mode field. Click this if you want to add a new MAC address entry to the MAC filter list below. # This is the index number of the entry. MAC Address This is the MAC addresses of the wireless devices that are allowed or denied access to the Zyxel Device. Modify Click the Edit icon and type the MAC address of the peer device in a valid MAC address format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc). Cancel Apply Click the Delete icon to delete the entry. Click Cancel to restore your previously saved settings. Click Apply to save your changes. 7.4.1 Add/Edit MAC Addresses Click Add new MAC address in the Network Setting > Wireless > MAC Authentication screen to add a new MAC address. You can also click the Edit icon next to a MAC authentication rule to edit the rule. Enter the MAC addresses of the wireless devices that are allowed or denied access to the Zyxel Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Figure 53 Network Setting> Wireless > MAC Authentication > Add/Edit PX7511-B0 User's Guide 98