ZyXEL GS2200-8HP User Guide - Page 177
Table 59, Label, Description
View all ZyXEL GS2200-8HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Chapter 23 Multicast Note: Your Switch automatically creates a static VLAN (with the same VID) when you create a multicast VLAN in this screen. Figure 109 Advanced Application > Multicast > Multicast Setting > MVR The following table describes the related labels in this screen. Table 59 Advanced Application > Multicast > Multicast Setting > MVR LABEL Active Name Multicast VLAN ID 802.1p Priority Mode DESCRIPTION Select this check box to enable MVR to allow one single multicast VLAN to be shared among different subscriber VLANs on the network. Enter a descriptive name (up to 32 English keyboard characters) for identification purposes. Enter the VLAN ID (1 to 4094) of the multicast VLAN. Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP control packets (belonging to this multicast VLAN). Specify the MVR mode on the Switch. Choices are Dynamic and Compatible. Select Dynamic to send IGMP reports to all MVR source ports in the multicast VLAN. Port * Select Compatible to set the Switch not to send IGMP reports. This field displays the port number on the Switch. Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Note: Changes in this row are copied to all the ports as soon as you make them. GS2200-8/24 User's Guide 177