ZyXEL GS2200-8HP User Guide - Page 248
Example: DHCP Relay for Two VLANs
View all ZyXEL GS2200-8HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Chapter 32 DHCP See Section 8.6 on page 72 for information on how to set up management IP addresses for VLANs. Figure 161 IP Application > DHCP > VLAN The following table describes the labels in this screen. Table 100 IP Application > DHCP > VLAN LABEL VID Remote DHCP Server 1 .. 3 Relay Agent Information Information DESCRIPTION Enter the ID number of the VLAN to which these DHCP settings apply. Enter the IP address of a DHCP server in dotted decimal notation. Select the Option 82 check box to have the Switch add information (slot number, port number and VLAN ID) to client DHCP requests that it relays to a DHCP server. This read-only field displays the system name you configure in the General Setup screen. Add Cancel Clear VID Type DHCP Status Delete Cancel Select the check box for the Switch to add the system name to the client DHCP requests that it relays to a DHCP server. Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. Click this to clear the fields above. This field displays the ID number of the VLAN group to which this DHCP settings apply. This field displays the DHCP mode (Relay). For DHCP relay configuration, this field displays the first remote DHCP server IP address. Select the configuration entries you want to remove and click Delete to remove them. Click Cancel to clear the Delete check boxes. 32.4.1 Example: DHCP Relay for Two VLANs The following example displays two VLANs (VIDs 1 and 2) for a campus network. Two DHCP servers are installed to serve each VLAN. The system is set up to forward DHCP requests from the dormitory rooms (VLAN 1) to the DHCP server with an IP address of 192.168.1.100. Requests from 248 GS2200-8/24 User's Guide