ZyXEL GS2200-8HP User Guide - Page 224
Sub-Option Format, Flexible Circuit ID Syntax with Identifier String and Variables, WT-101
View all ZyXEL GS2200-8HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Chapter 28 PPPoE The Tag_Type is 0x0105 for vendor-specific tags, as defined in RFC 2516. The Tag_Len indicates the length of Value, i1 and i2. The Value is the 32-bit number 0x00000DE9, which stands for the "ADSL Forum" IANA entry. i1 and i2 are PPPoE intermediate agent sub-options, which contain additional information about the PPPoE client. 28.1.2.2 Sub-Option Format There are two types of sub-option: "Agent Circuit ID Sub-option" and "Agent Remote ID Suboption". They have the following formats. Table 82 PPPoE IA Circuit ID Sub-option Format: User-defined String SubOpt 0x01 (1 byte) Length N (1 byte) String (63 bytes) Value Table 83 PPPoE IA Remote ID Sub-option Format SubOpt 0x02 (1 byte) Length N (1 byte) MAC Address or String (63 bytes) Value The 1 in the first field identifies this as an Agent Circuit ID sub-option and 2 identifies this as an Agent Remote ID sub-option. The next field specifies the length of the field. The Switch takes the Circuit ID string you manually configure for a VLAN on a port as the highest priority and the Circuit ID string for a port as the second priority. In addition, the Switch puts the PPPoE client's MAC address into the Agent Remote ID Sub-option if you do not specify any user-defined string. Flexible Circuit ID Syntax with Identifier String and Variables If you do not configure a Circuit ID string for a VLAN on a specific port or for a specific port, the Switch adds the user-defined identifier string and variables into the Agent Circuit ID Sub-option. The variables can be the slot ID of the PPPoE client, the port number of the PPPoE client and/or the VLAN ID on the PPPoE packet. The identifier-string, slot ID, port number and VLAN ID are separated from each other by a pound key (#), semi-colon (;), period (.), comma (,), forward slash (/) or space. An Agent Circuit ID Suboption example is "Switch/07/0123" and indicates the PPPoE packets come from a PPPoE client which is connected to the Switch's port 7 and belong to VLAN 123. Table 84 PPPoE IA Circuit ID Sub-option Format: Using Identifier String and Variables SubOpt 0x01 (1 byte) Length N (1 byte) Identifier String (53 byte) delimiter Slot ID Value delimiter Port No delimiter VLAN ID (1 byte) (1 byte) (1 byte) (2 byte) (1 byte) (4 bytes) WT-101 Default Circuit ID Syntax If you do not configure a Circuit ID string for a specific VLAN on a port or for a specific port, and disable the flexible Circuit ID syntax in the PPPoE > Intermediate Agent screen, the Switch automatically generates a Circuit ID string according to the default Circuit ID syntax which is 224 GS2200-8/24 User's Guide