ZyXEL GS2200-8HP User Guide - Page 315
Ppendix
View all ZyXEL GS2200-8HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
APPENDIX A Changing a Fuse This appendix shows you how to remove and install fuses for the Switch. If you use a fuse other than an included fuse, make sure it matches the fuse specifications in the chapter on product specifications. Removing a Fuse Disconnect all power from the Switch before you begin this procedure. 1 Remove the power cord from the Switch. 2 See the product specifications for the location of the fuse. Use a small flat-head screwdriver to carefully pry out the fuse housing. 3 A burnt-out fuse is blackened, darkened or cloudy inside its glass casing. A working fuse has a completely clear glass casing. Pull gently, but firmly, to remove the burnt out fuse from the fuse housing. Dispose of the burnt-out fuse properly. Installing a Fuse 1 The Switch is shipped from the factory with one spare fuse included in a box-like section of the fuse housing. Push the middle part of the box-like section to access the spare fuse. Put another spare fuse in its place in order to always have one on hand. 2 Push the replacement fuse into the fuse housing until you hear a click. 3 Push the fuse housing back into the Switch until you hear a click. 4 Plug the power cord back into the unit. GS2200-8/24 User's Guide 315