ZyXEL GS2200-8HP User Guide - Page 42
Table 5, DESCRIPTION - manual
View all ZyXEL GS2200-8HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 4 The Web Configurator Table 5 Navigation Panel Links (continued) LINK DESCRIPTION VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending on what you configured in the Switch Setup menu). You can also configure a protocol based VLAN or a subnet based VLAN in these screens. Static MAC Forwarding This link takes you to a screen where you can configure static MAC addresses for a port. These static MAC addresses do not age out. Static Multicast Forwarding This link takes you to a screen where you can configure static multicast MAC addresses for port(s). These static multicast MAC addresses do not age out. Filtering This link takes you to a screen to set up filtering rules. Spanning Tree Protocol This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent network loops. Bandwidth Control This link takes you to a screen where you can configure bandwidth limits on the Switch. Broadcast Storm Control This link takes you to a screen to set up broadcast filters. Mirroring This link takes you to screens where you can copy traffic from one port or ports to another port in order that you can examine the traffic from the first port without interference. Link Aggregation This link takes you to screens where you can logically aggregate physical links to form one logical, higher-bandwidth link. Port Authentication This link takes you to a screen where you can configure IEEE 802.1x port authentication for clients communicating via the Switch. Port Security This link takes you to screens where you can activate MAC address learning and set the maximum number of MAC addresses to learn on a port. Classifier This link takes you to a screen where you can configure the Switch to group packets based on the specified criteria. Policy Rule This link takes you to a screen where you can configure the Switch to perform special treatment on the grouped packets. Queuing Method This link takes you to a screen where you can configure queuing with associated queue weights for each port. Multicast This link takes you to screens where you can configure various multicast features, IGMP snooping and create multicast VLANs. AAA This link takes you to a screen where you can configure authentication, authorization services via external servers. The external servers can be either RADIUS (Remote Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller AccessControl System Plus). IP Source Guard This link takes you to screens where you can configure filtering of unauthorized DHCP and ARP packets in your network. Loop Guard This link takes you to a screen where you can configure protection against network loops that occur on the edge of your network. Layer 2 Protocol Tunneling This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling) settings on the Switch. PPPoE This link takes you to screens where you can configure how the Switch gives a PPPoE termination server additional subscriber information that the server can use to identify and authenticate a PPPoE client. Errdisable This link takes you to a screen where you can configure CPU protection and error disable recovery. IP Application Static Routing This link takes you to a screen where you can configure static routes. A static route defines how the Switch should forward traffic by configuring the TCP/IP parameters manually. 42 GS2200-8/24 User's Guide