ZyXEL GS2200-8HP User Guide - Page 36
Table 3, Color, Status, Description
View all ZyXEL GS2200-8HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 3 Hardware Panels To connect power to the Switch, insert the female end of the power cord to the AC power receptacle on the front panel. Connect the other end of the supplied power cord to a power outlet. Make sure that no objects obstruct the airflow of the fans (located on the side of the unit). See Chapter 43 on page 307 for information on the Switch's power supply requirements. 3.3 LEDs After you connect the power to the Switch, view the LEDs to ensure proper functioning of the Switch and as an aid in troubleshooting. Table 3 LED Descriptions LED COLOR PWR Green SYS Green PPS (GS2200-24P only) ALM Green Red Ethernet Ports LNK/ACT Green STATUS On Off On Blinking Off On Off On Off Blinking Amber On Blinking PoE Amber (GS2200-8HP or GS2200-24P only) FDX Amber (GS2200-24 or GS2200-24P only) Mini-GBIC Slots LNK Green Amber (GS2200-8/8HP only) ACT Green On Off On Off On Off On On Off Blinking DESCRIPTION The system is turned on. The system is off or has failed. The system is on and functioning properly. The system is rebooting and performing self-diagnostic tests. The power is off or the system is not ready/malfunctioning. External power supply is turned on. External power supply is turned off or has failed. A hardware failure is detected. The system is functioning normally. The system is transmitting/receiving to/from a 1000 Mbps Ethernet network. The link to a 1000 Mbps Ethernet network is up. The system is transmitting/receiving to/from a 100 Mbps Ethernet network. The link to a 100 Mbps Ethernet network is up. The link to an Ethernet network is down. Power is supplied to all PoE Ethernet ports. There is no power supply. The Gigabit port is negotiating in full-duplex mode. The Gigabit port is negotiating in half-duplex mode. The link to a 1000 Mbps Ethernet network is up. The link to a 100 Mbps Ethernet network is up. The link to this port is not connected. This port is receiving or transmitting data. 36 GS2200-8/24 User's Guide