ZyXEL NWA110AX User Guide - Page 108
Configuration > Wireless > AP Management continued, AP Mode, MON Mode, Root AP, Repeater, Manual
View all ZyXEL NWA110AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 10 Wireless Table 42 Configuration > Wireless > AP Management (continued) LABEL DESCRIPTION Radio 1 OP Mode Select the operating mode for radio 1. AP Mode means the radio can receive connections from wireless clients and pass their data traffic through to the Zyxel Device to be managed (or subsequently passed on to an upstream gateway for managing). MON Mode means the radio monitors the broadcast area for other APs, then passes their information on to the Zyxel Device where it can be determined if those APs are friendly or rogue. If a radio is set to this mode it cannot receive connections from wireless clients (see Section 1.2.3 on page 15). Root AP means the radio acts as an AP and also supports the wireless connections with other APs (in repeater mode) to form a WDS (Wireless Distribution System) to extend its wireless network. Radio 1 Profile Repeater means the radio can establish a wireless connection with other APs (in either root AP or repeater mode) to form a WDS. Select the radio profile the radio uses. Radio 1 WDS Profile Uplink Selection Mode Max Output Power Note: You can only apply a 2.4G AP radio profile to radio 1. Otherwise, the first radio will not be working. This field is available only when the radio is in Root AP or Repeater mode. Select the WDS profile the radio uses to connect to a root AP or repeater. This field is available only when the radio is in Repeater mode. Select AUTO to have the Zyxel Device automatically use the settings in the applied WDS profile to connect to a root AP or repeater. Select Manual to have the Zyxel Device connect to the root AP or repeater with the MAC address specified in the Radio 1 Uplink MAC Address field. Enter the maximum output power (between 0 to 30 dBm) of the Zyxel Device in this field. If there is a high density of APs in an area, decrease the output power of the Zyxel Device to reduce interference with other APs. MBSSID Settings Edit # SSID Profile Radio 2 Setting Radio 2 Activate Note: Reducing the output power also reduces the Zyxel Device's effective broadcast radius. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. In some tables you can just click a table entry and edit it directly in the table. For those types of tables small red triangles display for table entries with changes that you have not yet applied. This field shows the index number of the SSID This field displays the SSID profile that is associated with the radio profile. This displays if the Zyxel Device has a second radio. Select the check box to enable the Zyxel Device's second radio. NWA/WAC/WAX Series User's Guide 108